Bedini Tesla Switch DvD Questions.

[Jorge]

Hey guys!! What's happened after all these years? Greetings to all

[John_Koorn]

Hi All, I'm not dead. Still working on the Tesla Switch

John K.

[Barbaro]

Merry Christmas to all......

PATERNO' 21 marzo 2020 ( SICILIA )
good morning despite the coravirus situation we are all closed at home. so I spend more time with my tesla circuit breaker. now I kindly ask you the oscillator that of Jonn of the dvd2 and also suitable for a 12 volt 55 amper??????
battery circuit.
OK con 12 volt 7.2 amper.

[Aaron Murakami]

If you can post this in English, you may get a response.

[Barbaro]

I have been working on this circuit for many years and have not yet seen it smoked
I also bought the dvd2 I built the oscillator of exactly as in the film I only work with 4 12volt 7.2 amper batteries. I change 5 volts as in the diagram. I noticed on the page and in the forum there is a photo of the built circuit looks like a kit and I noticed that the oscillator is different from the one of the film, this one has 2 adjustment trimmers and some more capacitor. Now I wonder how I make a working circuit, I read from the inverted battery to make it work but I don't know or instruction in the forum that explains well the inverted battery. Can anyone help me. Thank you all.

[Barbaro]

[QUOTE=Barbaro;32404][QUOTE=Barbaro;31844]

[Brian McNece]

Hi, somebody upload video "Bedini Tesla Switch" No. 38 please.

I believe they are copyrighted dvds and need to be purchased, most of them are available at cheniere press
Google it. Used to be able to get them from John bedini’s organization.

[Fullness]

Hi, somebody upload video "Bedini Tesla Switch" No. 38 please.

[Barbaro]

E riferito alle due resistenze dell 'oscillatore da 330 ohm. Ma non capisco...ok forse ci sono.io sto dando una tensione da banco all'oscillatore 12 volt e 5 volt a sg3524 . ma cose' la tensione VR. ?????

[Barbaro]

As I look at a colour still shot again I think the two resistor values are the same. If this is so then 5 volts applied to the optos given their protection requirements yields ... I need a data sheet.

Non capisco.

[Corrin]

As I look at a colour still shot again I think the two resistor values are the same. If this is so then 5 volts applied to the optos given their protection requirements yields ... I need a data sheet.

[Barbaro]

Salve a tutti e da molti anni che cerco di fare funzionare il tesla swicth con le 4 batterie. Ho preso uno schema oscillatore da internet del sg 3524 ma funziona poco.le batterie non li carica piu di 8.00 volt e 9.00volt .Quindi Voglio capire le chiavi acquistando i dvd 38 che spiega la giusta forma d' onda del sg 3524 e lo schema del oscillatore. Qualcuno mi sa dire se sono esatto se e giusto il dvd 38.sapete se consegnano in italia?
Grazie.Ho acquistato i 2 dvd finalmente adesso aspetto che arrivano.
Salve finalmente ho ricevuto i 2 dvd o fatto l oscillatore e funziona ,ma non posso capire le parole le frasi che Jonn dice, e sto cercando di tradurre le parole con un traduttore in italiano. Non sto capendo la spiegazione. Cosa posso fare???

[Barbaro]

[Tom C]

yes we have them available. send an email to [email protected]

Tom C

Hi guy's,

Any PCB/boards available for purchasing?

Regards,
Ray

[Mundo81]

I watched "The Bedini Tesla Switch" DVD Disk2 again, saw how John Bedini connected, the extra 4 LEDs, 2 red and 2 yellow, (not shown on the white board) on his working demonstration. The LEDs are bypassing, the diodes on the negatives of the batteries and the reverse biased LED. I have added those LEDs in my 4 Battery Bedini Tesla Switch. Shown below.



The 4 LEDs are flashing like on John Bedini's demonstration. Now I can see the switch switching, from the indicator LEDs.

Here are some results so far. Running without a load.

B1	B2	B3	B4	Time
4.85V	4.98V	4.98V	5.01V	3:00am
4.86V	5.01V	4.99V	5.01V	3:24am
4.86V	5.07V	5.01V	4.95V	9:05am
4.85V	5.08V	5.01V	4.94V	10:08am
4.86V	5.08V	5.01V	4.95V	10:50am
4.87V	5.08V	5.01V	4.96V	11:57am
4.88V	5.03V	5.01V	4.96V	1:56pm
4.84V	5.06V	5.01V	4.96V	2:22pm

Now I can see all 4 batteries changing voltages. That is a very good sign.



If or when I get this 4 Battery Bedini Tesla Switch working, then I can apply the same, mods to the " Tri-Symmetrical 3 battery Tesla switch"


Most
Kindest
Regards
Nityesh Schnaderbeck

Hi Nityesh,

Great work!
Do you have these updated diagrams available?

Cheers,
Ray