Announcement

Collapse
No announcement yet.

Rife Machine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mpgmike
    replied
    One of the challenges of building a Rife type frequency generation device is producing fairly exact frequencies over an incredible range. The PIC Microcontroller family offers a Special Function called Numerically Controlled Oscillator (NCO for short) that provides both the resolution and range to produce Rife MORs. By combining 2 PICs, one can generate a sideband while the other generates the MOR. I've been working with this approach for about 2 years now.

    Leave a comment:


  • James McDonald
    replied
    Hi All --

    I just found this new Microscope Technology called the LS-DAC Microscope. Is this new technology or
    a modernize Rife Microscope? The PDF put out by the Biomedical Optics Express has the lead school in this
    paper being the University of Washington. Mainly the department there being the Department of Mechanical
    Engineering, Seattle, WA 98195, USA. See the paper on this microscope that detects Skin Cancer without
    cutting away skin tissue to send off to a testing lab. You can download the PDF on this device for free from
    the below link.

    https://www.osapublishing.org/boe/fu...-251&id=335231


    James McDonald

    Leave a comment:


  • Bung-ee
    replied
    Hello there,
    In order to get familiar with the Royal Raymond Rife history , and past and present technology, I would recommend Nenah Sylver's Handbook. I personally own it and can say it's a brilliant, just brilliant work. Some excerpts are available for free on her website. And there is a lecture she did that also is very very good.

    Leave a comment:


  • Tom C
    replied
    lookin forward to your results. I am gonna wait a couple of weeks. would love to hear the results of your experiments.

    Tom C

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by Tom C View Post
    does the generator need to be dual channel? I have the FG085 minidds function generator....it was a kit and it is single channel..... i think it does..

    Tom C
    Spooky2-XM's are dual channel and second one can be utilized with another DNA remote for more efficient and shorter treatment. XM's are newer generators which have some options via software which weren't available with older generators. I have one DDS which has a spot for USB port but I'm very happy with XM. This one is 5MHz model but due to the overclocking done by software it can run up to 35MHz. Amazing setup at very reasonable cost and "sky is a limit" possibilities as far as frequency sets, wave forms etc. Brilliant.
    I just got mine couple days ago and waiting for accessories. Below is my home made DNA remote.

    V
    Click image for larger version

Name:	DNA Holder.jpg
Views:	1
Size:	91.6 KB
ID:	46145

    Leave a comment:


  • Tom C
    replied
    does the generator need to be dual channel? I have the FG085 minidds function generator....it was a kit and it is single channel..... i think it does..

    Tom C

    Leave a comment:


  • blackchisel97
    replied
    Originally posted by Tom C View Post
    I have a function generator... can you tell me what the communication protocol is for the spooky software? does it use a serial port emulator thru usb?

    Tom c
    Hi Tom,

    I have couple DDS but decided to get Spooky2-XM5 just in case it has been customized. Spooky software is free and frequently updated. Drivers for both ports are included in the software download, including one for biofeedback. Spooky connects via USB and so does the biofeedback module.
    DNA remote and Biofeedback Pulse can be ordered from John White website but you can make DNA holder yourself. I ordered one but also got one made, using FR4 pcb (without copper) and two squares of ss mesh fastened around with epoxy. Paper masking tape can be used to hold DNA sample in place.

    V
    Last edited by blackchisel97; 03-30-2014, 05:02 PM.

    Leave a comment:


  • Tom C
    replied
    I have a function generator... can you tell me what the communication protocol is for the spooky software? does it use a serial port emulator thru usb?

    Tom c

    Leave a comment:


  • blackchisel97
    replied
    http://www.spooky2.com/index.html
    http://www.spooky2.com/forums/index.php

    V

    Leave a comment:


  • blackchisel97
    replied
    This research is based on Rife and using Phanotron Tube. I'm planning to merge Rife with Lakhovsky and use same tube with my MWO -

    Stop the suffering of children with cancer! | Indiegogo

    Vtech

    Leave a comment:


  • blackchisel97
    replied
    John_g, Your question was directed to amigo but I hope you don't mind my 2 cents.
    RF interference will be spread by mains and air. Good RF line filter will do the job but not everything may get stopped by Faraday Cage. It all depends on operating power level. I'm running at low power and have a spark gap but didn't notice any interference carried to household appliances. So, I believe it is possible to run such device indoors without affecting neighbors.
    Higher power levels could require some shielding but they are not necessary for efficient operating of these devices.

    Vtech

    Leave a comment:


  • john_g
    replied
    Originally posted by amigo View Post
    As far as I could discern, old systems did work because they were multi-frequency/multi-harmonic oscillators, resonating on many levels so that each cell in the body could find its match.

    Sadly, good luck doing that on any reasonable power level today because it would interfere with everything and anything, and you are bound to get a visit from some authority governing the radio spectrum where you live.

    Perhaps getting a HAM radio license might help at least put one in some kind of legal position for doing this. If I recall correctly, in Canada HAM operators can broadcast up to 100W in RF band, and in USA up to 1,500W.
    Could you not make a room into a Faraday cage and place/operate the equipment in there to stop any emissions straying?

    Leave a comment:


  • blackchisel97
    replied
    Ralph Hartwell site - Spectrotek Products - Page 1

    Vtech

    Leave a comment:


  • blackchisel97
    replied
    Amigo. There should be second part among the original uploader material. This has been reposted by different user since it has mysterious ability to disappear once in a while.

    Interesting reading - The End of All Disease - Can Disease Be Cured Electronically?

    Vtech

    I'm working on Lakhovsky antenna details. It is a pain to work from photograph but I'm not looking forward to reverse engineer Eric design. I'm aiming for 12" outer dia. made on FR4 2oz. I was thinking about using RF material such as Teflon but it turned out to be very expensive. Hopefully, should know within a day the cost. I'm preparing to get 3 sets for now since no one else seems to be interested except you. This is my distant project if I'll have any funds left to continue.
    Last edited by blackchisel97; 06-24-2013, 02:39 AM.

    Leave a comment:


  • amigo
    replied
    It appears it is missing video 2 of 6...

    Leave a comment:

Working...
X