Announcement

Collapse
No announcement yet.

The SG Radiant Oscillator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dominus
    replied
    "Cold electricity secrets" from P. Lindemann really gave me some good insights about radiant energy and how to obtain it (what I haven“t done yet haha... at least knowingly)

    Leave a comment:


  • Nofear
    replied
    Hi Dominus,
    Interesting setup. Everyone is free to build their SSG to their liking but it is much easier to relate to something that is more standard when trying to offer suggestions.
    Having said that: The neon lamp is filled with a gas and as such it absorbs the radiant energy keeping the voltage around 90v and your transistor safe. I don't believe a resistance can do that.

    As for your battery, If it is flat at 13.3V, it is faster to discharge it to 10+V and start a new charging cycle. You might observe that your battery will go pass 13.3 the second time around.
    Good luck. please report back and let us know how it all turned out.
    NoFear.

    Leave a comment:


  • Dominus
    replied
    I made a SS SSG

    12 twisted strands coil to make tests and/or add transistors. 0.45mm and 0.7mm wire. 100 Turns. This coil runs MUCH cooler than the previous one I had connected to it!! (a much longer and thinner wired one) Overall power of the unit has gone up.

    Taking 20W from the wall... it blows away the neon lamp - Would the protective function still be accomplished if connected with a resistor??

    Now charging a sulphated 200Ah 12V Lead-Gel battery. It´s sitting at 13.3V and does not seem to get higher. Waiting for the optocouplers to make a Cap-dump...

    I think I may be adding transitors for simultaneous charge of 1.5 and 9V batts on the thin wires.

    Comments welcome
    Last edited by Dominus; 10-10-2013, 12:06 AM.

    Leave a comment:


  • GlenWV
    replied
    Originally posted by BroMikey
    Hi Glen i am on yahoo but this link does not work, however with his name I find some things like this

    BEMF-Recoil Recovery Battery Charger- By KoneheadX

    Blessings and salutations


    Mike


    Mike,

    The group name is: EVGray

    You might also like: freeenergysurprise, lahf, and teslaflyingmachine.

    glen

    Leave a comment:


  • GlenWV
    replied
    Originally posted by BroMikey
    Radiant Energy Generator using impulse technology with the SG Osc.

    Coil popping demo Coil Popping.ASF - YouTube

    Aaron did this demo as well.

    Ed Gray style radiant harvesting

    Ed Gray Motor Coil Test - YouTube
    Mike,

    KoneheadX has a bit on coil shorting here: Yahoo! Groups

    You'll have to join the group to see posts, but this'll point you in the right direction.

    glen

    Leave a comment:


  • Faraday88
    replied
    you said it bromikey ..that's ok you tried your best...
    Rgds,
    Faraday88.

    Leave a comment:


  • T-1000
    replied
    Hi,

    There is also old concept in Russian side which is somewhat directly related to SG radiant oscillator - Google Translate - http://www.skif.biz/index.php?name=Pages&op=page&pid=103 (Google translate seems to fail - the direct link is http://www.skif.biz/index.php?name=P...p=page&pid=103 )
    This concept concentrates on shorting part of coils so the BEMF is doubled on each time of opening of transistor S1. To be more precise, the transistor S1 energizes coil, then the second transistor S2 shorts resistive coil which is between another two inductive and makes series connection between them so the BEMF is doubled. Then the charge is dumped into capacitor. The last step is recovering the charge of capacitor back to power source (that's marked as box in bottom) after first two cycles are done. So for concept testing any logic counting circuit can be used there so it would switch on S1->S2->recharge steps easily.

    For curious people there is old video circulating in Youtube: Free energy generator - YouTube

    Cheers!
    Last edited by T-1000; 10-07-2013, 05:07 PM.

    Leave a comment:


  • Dominus
    replied
    Daniel Nunez - YouTube

    What about using these coils?

    Leave a comment:


  • Faraday88
    replied
    Hi Bromikey,
    How do you accomplish the Cap -dump from the Impulse coil (there is a Bridge diode module connected to the Impulse coil i'm sure..),
    your diagram shows Positive and Negative dump to the Source Battery along with the 3rd Battery.. why is the 3rd battery needed any way..
    rgds,
    Faraday88.

    Leave a comment:


  • Nofear
    replied
    Hi Mike,
    This look and feel different then what JB and what I believe Patrick was pointing at with the "could be as simple as moving one wire" comment thingy. The premise I am working from is that when the secondary battery is fully charged...then...some energy is bounced back to charge the primary.
    In your flow chart/schematic the primary battery can be charge any time, independently of the state of charge of secondary battery.
    So do you still think that that what JB was talking about?
    NoFear.

    Leave a comment:


  • Faraday88
    replied
    Hi All,
    Radiant Energy is not of Nuclear Radiation nature.. which are are actual Particle Radiation like the alpha or Beta or Electromagnetic Radiation like the gamma Radiation,
    Electromagnetic Radiation known to academic Science is only of TRANSVERSE WAVE NATURE!
    Radiant Electricity is of LONGITUDINAL WAVE NATURE. We need Scalar Wave detector for this, Geiger Muller counter is of no use here.. although Ionization does happen in this case as well..hence the Simple Neon Glow Discharge plasma detector..
    Rgds,
    Faraday88.
    Last edited by Faraday88; 10-06-2013, 11:03 PM.

    Leave a comment:


  • Faraday88
    replied
    Sure will try to send better ones..
    rgds,
    Faraday88.

    Leave a comment:


  • Nofear
    replied
    Hey Mr Faraday.
    Your pics are out of focus...! care to re-post?

    Leave a comment:


  • T-1000
    replied
    Originally posted by Faraday88 View Post
    John shows this in one of John's EFTV DVD, indicated by the Glow of the Neon Bulb.. well, actually dry Battery will not reveal such effect.. most of the Lead-Acid have the acid spillage over some parts along the side of the cell vent.
    Colman Test Unit Improvements (Battery) #3 - YouTube - The Geiger counter is registering emissions from battery. The question there is, what particles are being registered..?

    Leave a comment:


  • Faraday88
    replied
    Click image for larger version

Name:	086 - Copy.jpg
Views:	1
Size:	22.8 KB
ID:	45864

    Here is the missing photo the glow from the interior of the battery vent...
    Rgds,
    Faraday88.

    Leave a comment:

Working...
X