Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


2019 ESTC ALL SEATS SOLD OUT!
PRE-REGISTER FOR THE
2020 ENERGY CONFERENCE

Monero XMR

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: How to Build a Bedini SG by Peter Lindemann

  1. #1
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,455
    Blog Entries
    1

    Thumbs up How to Build a Bedini SG by Peter Lindemann

    How to build a Bedini SG according to the specs in Bedini SG - The Complete Beginner's Handbook Bedini SG - The Complete Beginner's Handbook

    This is the kit assembly by Peter Lindemann, but even if you don't have a kit, this will address many issues that you will encounter even if you make a homemade one.

    Here is the video - How to Build a Bedini SG Energizer - YouTube


    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  2. #2

  3. #3
    Hi,

    Why the change from 24 magnets to only 21 magnets in the kit?

    At about 36:43 into the video, Peter talks about the importance of even spacing in case more coils are added later. If more coils are added and fire in unison, then you can only run either 1, 3, or 7 coils total!!!

    With 24 magnets, as originally offered, you would be able to run 1, 2, 3, 4, 6, or 8 coils all firing at the same time. Does the uneven vs the even firing per revolution make any difference in the outcome or COP? Or is it only about getting the best distance between magnets for best scaler S pole strength?
    Last edited by Gary Hammond; 04-20-2013 at 09:41 AM.
    Gary Hammond,

  4. #4
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,455
    Blog Entries
    1
    Quote Originally Posted by Gary Hammond View Post
    Hi,

    Why the change from 24 magnets to only 21 magnets in the kit?

    At about 36:43 into the video, Peter talks about the importance of even spacing in case more coils are added later. If more coils are added and fire in unison, then you can only run either 1, 3, or 7 coils total!!!

    With 24 magnets, as originally offered, you would be able to run 1, 2, 3, 4, 6, or 8 coils all firing at the same time. Does the uneven vs the even firing per revolution make any difference in the outcome or COP? Or is it only about getting the best distance between magnets for best scaler S pole strength?
    For this exact size of wheel, 24 magnets would make the spaces between pretty close. 21 is better to open it up a bit. If you want to run multi coils, then just put on 20 magnets - it will actually run a bit faster than 21. 20 magnets will run just fine. With this particular frame for this kit, it isn't setup to add more coils, but if you are making your own 10 coiler or whatever, just use 20 magnets.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  5. #5
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,455
    Blog Entries
    1
    If this video is helpful, please go to youtube and "LIKE IT" - thanks!
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  6. #6
    This is a great video!!

    What is the exact measurement between each magnent, not from centre to centre to each magnents?

    John

  7. #7
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,455
    Blog Entries
    1
    Quote Originally Posted by powermanch View Post
    This is a great video!!

    What is the exact measurement between each magnent, not from centre to centre to each magnents?

    John
    On the wheel in the video, they're not all super exact. They go from 2 5/16 to 2 7/16. That is from the end of one magnet to the end of another.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  8. #8
    Aaron,

    I have 24 magnents on this wheel , it measured 24 1/2 inches, and I measured it the way it shows on Page 55 in the sgbedini beginners manual,
    magnents spacing turned out to be 2 7/16 inches, so I am looking OK,
    wheel is turning 300 to 346 RPM with out fan,

    John




    IMG204.jpg

  9. #9
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,455
    Blog Entries
    1
    John, sounds good!

    I just did a test on the SG that we just filmed - it's going 250 rpm with the fan. I haven't done any real measurements yet, but it pushed the output battery to 15.67, which is a bit much. 15.2 to 15.3 is about the max I should push the batt to.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  10. #10
    Aaron,

    I have pushed a 26ah SLA battery higher then 16.15volts, now I wounder if it damaged it, you see I am experminting with a used battery first,
    I am now working with a storage scope, it shows a guy the real story, it shows the graphing, and that tells a lot, Thanks to (Battery Secrets by Peter Lindemann)
    Learning, Learning,

    By the way I have interested in replacing mine circuit board with a Bedini SG 7 Transistor Expirmenter kit as soon as they show at teslagenx.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •