Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


2019 ESTC ALL SEATS SOLD OUT!
PRE-REGISTER FOR THE
2020 ENERGY CONFERENCE

Monero XMR

Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: quanta magnetics Q2

  1. #1

    quanta magnetics Q2

    Sorry if this is the wrong place... but has anyone bought a Q2 Kit from Quanta Magnetics, I have... and have few questions and never got any response from these people... I am wondering if it works at all...

    Thanks.
    Last edited by TheStone16; 04-15-2013 at 08:57 AM.

  2. #2
    You just lost your money on an expensive scam.

    I've seen those videos from that company and they're fraudulent.

    One video he shows hooking up a battery, running the machine, removing the battery and it runs on caps.
    He is making it look like the caps just got charged up but they were obviously ALREADY charged up. He doesn't
    show the voltage of the caps before it starts running to show you they're already charged.

    $3000 for that scam? I'd be writing the attorney general in his state to get your money back. He will be forced
    to respond.

    What's the mailing address for the company?
    Last edited by John; 04-15-2013 at 12:25 PM.

  3. #3
    Senior Member Tom C's Avatar
    Join Date
    Jul 2012
    Location
    Pacific Northwest
    Posts
    1,888
    Quote Originally Posted by TheStone16 View Post
    Sorry if this is the wrong place... but has anyone bought a Q2 Kit from Quanta Magnetics, I have... and have few questions and never got any response from these people... I am wondering if it works at all...

    Thanks.
    Did they give you a shipping date?

    Tom C


    experimental Kits, chargers and solar trackers

  4. #4
    Quote Originally Posted by Tom C View Post
    Did they give you a shipping date?

    Tom C
    Hi Tom,

    I got the kit with me.

    Oscar

  5. #5
    Hi The Stone16,
    I am very interrested by the Q2, I have send several messages to Quanta Magnetic but they do not respond. You can try to joint Scorch in the OverUnity forum, he also bought Q2 kit, maybe he can help you.I was thinking order the Q2 kit, but with the no communication probleme, I think to make a replique if I can work with the instructions supplied with the kit. Could you share the documentation so that we know a little more about this machine.
    best regard, marc

  6. #6
    Quote Originally Posted by Marc Lamouroux View Post
    Hi The Stone16,
    I am very interrested by the Q2, I have send several messages to Quanta Magnetic but they do not respond. You can try to joint Scorch in the OverUnity forum, he also bought Q2 kit, maybe he can help you.I was thinking order the Q2 kit, but with the no communication probleme, I think to make a replique if I can work with the instructions supplied with the kit. Could you share the documentation so that we know a little more about this machine.
    best regard, marc
    Hi There, thanks for your message, The kid has very good parts, but instructions are almost none, if you dont know what you are doing, I dont think you can put it together... beside the fact that after paying 3K, you have to buy 12 N52 magnets, about 1500 USD and the Capacitors, another 1000 USD, this kid is designed for the very few, that want t risk money, as it is very expensive and you dont know if it works as in the video...

    For the Forum, they have 0 "Zero" support, that is why I am telling you you better know what you are doing, so you can make sense of the video on youtube and the 5 photos that come with the Kit....

    About the documentation, I really don't think is right to give it away, but I can answer questions and stir you on the right way, but believe me, there is NOT much...

    http://www.overunity.com/3842/muller.../#.UX63YYJNpsg here it very much the same device replicated, hope this helps

    It have taken me several weeks going over and over the 5 pages, to understand many things that they do not tell you how, or the operation of the Q2. Which I will not know if I did it right till I do some test...

    But because the lack of support and everything else, will make people share and share, they are not being smart...
    Last edited by TheStone16; 04-29-2013 at 12:18 PM.

  7. #7
    thank for your answer TheStone16, after viewing the two videos several time, I have designed a wiring diagram which could be that of Q2. To mount the machine I think have no problem. I have yet to find information about coils ( motor and alternator ) to start a replica. Given the lack of support I prefer this solution.

  8. #8
    Hi Marc,

    The coils are simple coils, not bifilar, or anything, just simple
    Attached Images Attached Images

  9. #9
    Oscar,
    Thank for the photo of the coil, I see you on a different forum, and you say you have no schematic with the kit.
    The Q2 is two machines in one, the motor and the alternator.
    For the motor all the magnets are on the same way, all north on the same side N/N/N/N/N/N.
    for the atternator ....N/S/N/S/N/S.
    What part of the schematic you don't understand ?

    PS: Sorry for my enghish, I am french it is not to easy for me

  10. #10
    Hello!! thanks for the message, I get the polarity of the magnets, and that it is a two part machine, Motor/Generator, but what I am having problems is with the motor, I cant get it to work. I guess I cant get the coils polarity with magnets correct...
    He connects every two coils in parallel but in series at the same time, I made a schematic of it, I will posted next as I can only upload one photo file.

    Besides I had to replace the main central bar, as it did not fit the magnet weel, plus, the screws one one side dont fit, I will have to find some...

    Here is the schematic I made trying to make sense of what these people did... I wonder if it works at all... there it goes 5 K USD...

    I am in Spain.

    Thanks.
    Attached Images Attached Images

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •