Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


2019 ESTC ALL SEATS SOLD OUT!
PRE-REGISTER FOR THE
2020 ENERGY CONFERENCE

Monero XMR

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: quanta magnetics Q2

  1. #11
    oscar, do you can upload your photo in better resolution , please , I can't read it

  2. #12
    I am in martinique and my imternet connection is not on the top, If I can read your schematic I can check it and send to you my schematic with explications

  3. #13
    Hi Mark, which photo you need with better resolution ?
    Last edited by TheStone16; 05-01-2013 at 09:54 AM.

  4. #14
    Oscar, I send you an email.....you have it ?

  5. #15
    Oscar, I email you , check your configuration. marc

  6. #16
    For anyone interested... these are what I found :

    1.- I found that after mounting all my coils and magnets for the motor part, did not worked... I was assuming that all the coils where wound in the same way, but found 3 of the coils wound with opposite force field, I had to turn the coils around to see if this will fix this, other wise, I will have to unwound each coil and make sure is wound the correct way.

    2.- The only think I dont understand if you pay so much money for this kit, there is not instructions of any kind of how to assemble the coils with respect to magnets... and no support.

    3.- I had to wait two months for the kid, there is no support, no one answer your questions, etc... just follow Scorth posting and you will get something similar or better.

    4.- In the vide I have posted in YouTube, you can see that as I press the shaft, to simulate a load, the current goes way up, with tells me in this setup we are not able to get rid of Lenz... as opposed to bedini motors, as you simulate a load, current goes down, because there is no Lenz effect here.

    Q2 Quanta Magnetics Findings.... - YouTube

    5.- I wonder if some one can explain this, on why does it happen with the Quanta Magnetics Q2 motor.

    6.- There other thing I notice is that does not have torque... using 12 coils with 30 volts... I can stop the bar easy without any problem... as opposed with Bedini SSG, using 6 coils with the small SSG r-charge kit, there is no way to stop the shaft... I wonder why too.

    Conclusion : no support at all, there is not good documentation, no schematics, and Lenz law everywhere, plus no torque... sad but looks like it is a waste of money....
    Last edited by TheStone16; 05-04-2013 at 03:04 AM.

  7. #17
    Quote Originally Posted by Tom C View Post
    Did they give you a shipping date?

    Tom C
    For anyone interested... these are what I found :

    1.- I found that after mounting all my coils and magnets for the motor part, did not worked... I was assuming that all the coils where wound in the same way, but found 3 of the coils wound with opposite force field, I had to turn the coils around to see if this will fix this, other wise, I will have to unwound each coil and make sure is wound the correct way.

    2.- The only think I dont understand if you pay so much money for this kit, there is not instructions of any kind of how to assemble the coils with respect to magnets... and no support.

    3.- I had to wait two months for the kid, there is no support, no one answer your questions, etc... just follow Scorth posting and you will get something similar or better.

    4.- In the vide I have posted in YouTube, you can see that as I press the shaft, to simulate a load, the current goes way up, with tells me in this setup we are not able to get rid of Lenz... as opposed to bedini motors, as you simulate a load, current goes down, because there is no Lenz effect here.

    Q2 Quanta Magnetics Findings.... - YouTube

    5.- I wonder if some one can explain this, on why does it happen with the Quanta Magnetics Q2 motor.

    6.- There other thing I notice is that does not have torque... using 12 coils with 30 volts... I can stop the bar easy without any problem... as opposed with Bedini SSG, using 6 coils with the small SSG r-charge kit, there is no way to stop the shaft... I wonder why too.

    Conclusion : no support at all, there is not good documentation, no schematics, and Lenz law everywhere, plus no torque... sad but looks like it is a waste of money....

  8. #18
    Hello.
    Quanta Magnetics offer now assembly manuals (http://www.quantamagneticstore.com/q...uals-only.html). Maybe you can ask them via youtube to give the pdf to you. When I contacted them via youtube they sent me an answer.

  9. #19
    There appears to be no company with precisely that name registered in the US, but it could be one of those listed below, I suppose:
    http://www.sec.gov/cgi-bin/browse-ed...ion=getcompany

    Quanta could be a marketing product name, of course, but the lack of anything useful in the "contact us" box of their site does not auger well.

    Does anyone know how their products work?

  10. #20

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •