Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


2019 ESTC ALL SEATS SOLD OUT!
PRE-REGISTER FOR THE
2020 ENERGY CONFERENCE

Monero XMR

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: ZFM Advanced Explorations Part II

  1. #11
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344
    Hey Aaron,

    Still having issues in not being able to post over a 100 words or so when in advanced mode. Preview of post yields a blank screen and then wind up not being able to to bring up EFS site at all. I will try my backup laptop to see if the same issue exists on a newer operating system. We went through a similar set of issues about a year ago...
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  2. #12
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344
    Aaron,

    Tried another computer with Win7Pro with the same negative results. Frustrating, but then again I can post sometime in the future. I will continue my experiments irregardless of these speed bumps.
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  3. #13
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,438
    Blog Entries
    1
    Quote Originally Posted by Yaro1776 View Post
    Hey Aaron,

    Still having issues in not being able to post over a 100 words or so when in advanced mode. Preview of post yields a blank screen and then wind up not being able to to bring up EFS site at all. I will try my backup laptop to see if the same issue exists on a newer operating system. We went through a similar set of issues about a year ago...
    Can you post more than 100 words in non-advanced mode? I'm trying to find out how to increase it either way.
    Aaron Murakami





    “You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  4. #14
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344
    Just tried a three paragraph copy and paste from the Word document I have been using to Quick Reply. Clicking the Post Reply button gives a "do you want to leave page" message. Pushing yes button yields a blank page.
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  5. #15
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344
    Greetings to all the wanderers of the aether,
    Having concluded the first phase of the next generation ZFM, one can now go forward to the actual design phase of this project. Please bear in mind that this and the following posts of the project progression are essentially a digital form of documentation. There may be areas that are a bit unclear, but do not expect to have every detail to be fully explained – otherwise, where would the challenge and enjoyment be?

    Limit of posting reached!
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  6. #16
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344

    Design Phase Next Gen ZFM

    Spinning my wheels here with this post - moving to a .PDF file to keep the information flowing. Apologize for the inconvenience.
    ZFM Advanced Explorations Phase II Design.pdf
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  7. #17
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    344

    6 Pole Coil Arc

    Over the weekend a 45 degree coil (210 ft #20 mag wire) was wrapped and installed in the existing YZFM motor body using the same rotor and Neo config as the prior N-S test. Same degree wheel, 12v LAB, etc.

    The results of this experiment definitely demonstrate that the coils magnetic poles are located away from the coil, in this instance the total arc between the coil's poles is 65 degrees. Some further tweaking will be required to hit the 60 degree arc value by dimensional changes and radial positioning.
    ZFM 6 pole coil.jpg.
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

  8. #18
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,438
    Blog Entries
    1
    test this is a test test
    Aaron Murakami





    “You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  9. #19
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,438
    Blog Entries
    1
    Design Phase Next Gen ZFM


    Greetings to all the wanderers of the aether,


    Having concluded the first phase of the next generation ZFM, one can now
    go forward to the actual design phase of this project. Please bear in mind
    that this and the following posts of the project progression are essentially a
    digital form of documentation. There may be areas that are a bit unclear,
    but do not expect to have every detail to be fully explained – otherwise,
    where would the challenge and enjoyment be?


    There are multiple options to that could be explored for the next YZFM
    design phase; however a progressive approach has been selected for the
    sake of simplicity and continuity. In this approach, the ZFM rotor will be
    expanded to 6 poles with an alternating N-S Neo arrangement. While this
    does move away from the Bedini method of similar polarity Neo's 180
    degrees apart, however it does retain the empty arc segments, thereby
    creating a virtual coil between each of the other three coil ends similar to
    the 4 pole ZFM method.


    So this build will utilize three coils equally spaced 120 degrees apart with
    the desired empty space and utilize the same type of build design and
    overall dimensions as the prior 2016 motor. The plastic pipe type of build is
    inexpensive, reliable and easily modified. Adapting it to three coils is very
    easily accomplished.


    The coil dimensions will be designed with the results of the prior posts in
    mind. A short series of experiments were completed the other day that did
    verify the N-S rotor polarity arc results from the prior posts; however in this
    instance both coils were energized with an on/off toggle to minimize any
    overheating. The results of the rotor arc rotation experiments, with two coils
    in play, are identical to the single coil experiments. That experiment
    resolves the single versus two coil question.


    The initial step will be to wind a bifilar coil with the desired resistance and
    coil arc, then retrofit it to the existing YZFM motor/body to verify the
    shortened coil pole arc value. The bifilar wind is intended to be used for the
    parallel mode of operation and as a comparison to the series mode of
    operation.
    At a future and appropriate time other similar and larger ZFM configurations
    will be explored and discussed.
    It will be a bit of time before the next 6 pole coil experiment post…


    Happy Fall
    Aaron Murakami





    “You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  10. #20
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,438
    Blog Entries
    1
    Yaro, can you try to post your long post to see if it works? Been working with the host of my server and they worked out the issue it seems. At least I could post the text in your pdf. Please let me know what happens when you try.
    Aaron Murakami





    “You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •