Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 150 118 99 SEATS AVAILABLE! - 2019 ENERGY CONFERENCE

Monero XMR

Results 1 to 5 of 5

Thread: Currently working on Bedini Beginner

  1. #1

    Currently working on Bedini Beginner

    Hi,
    I have purchased the Bedini Handout and am currently working on the beginner version.
    I followed all the instructions and bought almost all the same electrical components as stated in the handout.
    However, when I hooked my circuit up and connected the power, the NEON light lighted up and there was no current in the coil.
    Also, for the solenoid, I used a single iron rod instead of the multiple welding rods, is that okay?

  2. #2
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,352
    Blog Entries
    1
    Quote Originally Posted by bedinistarter View Post
    Hi,
    I have purchased the Bedini Handout and am currently working on the beginner version.
    I followed all the instructions and bought almost all the same electrical components as stated in the handout.
    However, when I hooked my circuit up and connected the power, the NEON light lighted up and there was no current in the coil.
    Also, for the solenoid, I used a single iron rod instead of the multiple welding rods, is that okay?
    Just to have a little SG that just runs so you can learn the principles, a single iron rod is ok. Less efficient, but will work.

    Do you have the output connected to a battery to charge up? If not, the neon will light up.

    Please post some pics so we can see your setup.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

  3. #3
    Okay, thank you for that information.
    I have an output battery, however it is a full battery, could that be the reason why?
    Also, what kind of board do you recommend a beginner to use. I am a currently using a breadboard, and it seems like it burns the plastic. Can I use a stripboard and solder the components onto it?

  4. #4
    I will post some pictures (Monday), when I get a chance to since it is not at my home with me.

  5. #5
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,352
    Blog Entries
    1
    Quote Originally Posted by bedinistarter View Post
    Okay, thank you for that information.
    I have an output battery, however it is a full battery, could that be the reason why?
    Also, what kind of board do you recommend a beginner to use. I am a currently using a breadboard, and it seems like it burns the plastic. Can I use a stripboard and solder the components onto it?
    Maybe you can place a dead battery on the back and see if the neons turn off.

    Breadboard - not likely it will burn the plastic. With some small setup if that is what you have, probably won't draw that much current but yet, solder the components, much better anyway with real connections.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete. ― Richard Buckminster Fuller

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •