Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 150 118 90 2 SEATS AVAILABLE! - 2018 ENERGY CONFERENCE

Monero XMR

Page 10 of 11 FirstFirst ... 891011 LastLast
Results 91 to 100 of 109

Thread: Bedini 1984, 2017 style.

  1. #91
    Quote Originally Posted by Deuis View Post
    Here you go Patrick I cleaned up the data and used a better meter.
    Keep in mind that using a resistive load straight from the coil is not the way to drain the energy properly.
    What configuration gennie coil have you found to be a good fit?
    Attachment 6983
    Adding a genny to an SSG can be tricky if one hopes to optimize it's output. Some things to balance...

    - strength, spacing and size of magnets
    - coil core material, diameter, shape and length
    - outer spool diameter and length
    - wire size and number of turns
    - how much voltage vs amps do you desire on the output
    - magnet to core gap

    - the motoring strength of SSG is critical as well as the speed at which it wants to run.

    please, anyone, add more that would truly be relevant to a coils output as a generator only.

    - Is a coils output truly liniar in voltage and amps to the number of winds?

    Here is more food for thought:
    http://hyperphysics.phy-astr.gsu.edu...con.html#emcon
    look at the "magnetic fields" string to start.

    So now, if your desire is not to use the SSG as the prime mover, one still has to take into consideration all aspects of the motor being used to turn the wheel.

  2. #92
    - My magnets are set for the moment, double stacked 2X1X1/2". Spacing is set to 18 magnets on a 26" wheel.
    - Core material i've played with a little, but its the diameter and length I will be devoting a bit of time to later.
    Peter makes up with his core material by enlarging it inside the core. Does it need to be done this way or simply use a longer narrower core which you can wrap more turns on. Iron doesnt get effected like an air gap of sorts so is it simply chasing a mass of iron that compliments more turns for the same length of wire.
    -Wire size and number of turns are my tricky one. A large size leads to minimal internal losses but reduces turn count, its a balancing act. I plan on doing an 18AWG gennie coil and compare them to the 23.
    -The VA output is efficiency based for how much torque you need to arrest on your SG Prime mover.
    -Magnet to core gap I can vary while the machine is running to tune fairly easy.
    -The whole idea of the SG is to produce non-linear results so its a gray area.

    The SG will certainly be used but there is so much groundwork data that needs to be done that its a while away.
    In a perfect world the old soldiers would have posted this stuff already so everyone doesnt have to start from scratch and get no where.
    I havent seen any good data. Either it doesnt exist or someone is hodling.
    Cant spend it when your dead.

  3. #93
    From another Thread, i hope this helps......

    Hi Richard,

    Ask your self why JB twist's up together the Trigger and all drive strands on SG/SSG coils (Energizer), JB also said not to twist the coils strands on a window motor or on a Zero Force Motor (Torque). What is going on with the Heaviside Flow around the wires, and how the twist effects the Polyting (sp) flow? What geometric patterns would various numbers of strands create in the Ather around the twisted strands....? Can you visualize these patterns in the Aether around a wire with the Bloch Wall in the center of the stretched out Strands? like a high line wire..... then what does the Ather/Heaviside Flow geometric patterns around a muilty strand twisted coil with various strand counts look like...?

    Much like Litzed Magnet Wire in commercial app's.... Why...?

    NOW, Ask your self why a muilty strand Twisted coil, with the strands in a series adding config like the Tesla Pancake Coil Patent, works better for a Genny coil than a single strand coil with the same length of wire.

    Now visualize commercial Litzed Magnet Wire in a series adding config like the Tesla Pancake Coil Patent...... Or on a SG/SSG muilty strand coil..... why...?

    Ask you self what would happen if you rotated that Genny coil 90deg to the rotor magnets much like a Window Motor and ZF motor works. How will that effect the drag on the rotor from that genny coil, compared to the standard core end facing the rotor if they are both shorted, and just current flowing through the coil (A Load on the Rotor)...?

  4. #94
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,447
    Quote Originally Posted by RS_ View Post
    From another Thread, i hope this helps......

    Hi Richard,

    Ask your self why JB twist's up together the Trigger and all drive strands on SG/SSG coils (Energizer), JB also said not to twist the coils strands on a window motor or on a Zero Force Motor (Torque). What is going on with the Heaviside Flow around the wires, and how the twist effects the Polyting (sp) flow? What geometric patterns would various numbers of strands create in the Ather around the twisted strands....? Can you visualize these patterns in the Aether around a wire with the Bloch Wall in the center of the stretched out Strands? like a high line wire..... then what does the Ather/Heaviside Flow geometric patterns around a muilty strand twisted coil with various strand counts look like...?

    Much like Litzed Magnet Wire in commercial app's.... Why...?

    NOW, Ask your self why a muilty strand Twisted coil, with the strands in a series adding config like the Tesla Pancake Coil Patent, works better for a Genny coil than a single strand coil with the same length of wire.

    Now visualize commercial Litzed Magnet Wire in a series adding config like the Tesla Pancake Coil Patent...... Or on a SG/SSG muilty strand coil..... why...?

    Ask you self what would happen if you rotated that Genny coil 90deg to the rotor magnets much like a Window Motor and ZF motor works. How will that effect the drag on the rotor from that genny coil, compared to the standard core end facing the rotor if they are both shorted, and just current flowing through the coil (A Load on the Rotor)...?
    Hi RS,
    These are the correct Scientific ways of questioning that one must ponder with if he/she is to understand Broken Symmetry, Asymmetrization, intercepting 'wasted' component(Heaviside), Difference between ONE and MANY... and the Radiant Electricity.
    Rgds,
    Faraday88.
    ‘Mass is spatial density of Matter (Particle) and Temporal density of Space (Field)’.

  5. #95
    Thanks RS,

    This 23AWG Generator coil is a mutilstranded twisted coil in the below configuration.
    All testing was done with this coil in different configurations.
    Core pointed Vertically over the North Magnet
    Coil config.JPG
    Last edited by Deuis; 07-13-2018 at 01:15 AM.
    Cant spend it when your dead.

  6. #96
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,447
    Quote Originally Posted by Deuis View Post
    Thanks RS,

    This 23AWG Generator coil is a mutilstranded twisted coil in the below configuration.
    All testing was done with this coil in different configurations.
    Core pointed Vertically over the North Magnet
    Coil config.JPG
    Good try ..but not good enough!!!
    Rgds,
    Faraday88.
    ‘Mass is spatial density of Matter (Particle) and Temporal density of Space (Field)’.

  7. #97
    Quote Originally Posted by Faraday88 View Post
    Good try ..but not good enough!!!
    Rgds,
    Faraday88.
    Shoo fly, don't bother me.
    Cant spend it when your dead.

  8. #98
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,447
    Quote Originally Posted by Faraday88 View Post
    Good try ..but not good enough!!!
    Rgds,
    Faraday88.
    @RS and others It was my response for the Truth seekers not for hooligans!!!
    ‘Mass is spatial density of Matter (Particle) and Temporal density of Space (Field)’.

  9. #99
    Deuis,

    2018-07-13_14-38-24.jpg

    This is a series adding coil strands, what your Sch show's, is not series adding..... All though you may have your coil hooked up like this, and only the Sch is wrong.....
    Last edited by RS_; 07-13-2018 at 02:49 PM.

  10. #100
    Schematic was wrong.
    Its dual coils in series.
    2 x 4 filar series.JPG
    Cant spend it when your dead.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •