Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 13% OF THE SEATS ARE AVAILABLE!!!*** 2017 ENERGY CONFERENCE ***

Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 42

Thread: Bobs 1st 3D Project

  1. #31
    Solavei
    Just an update picture here.

    I am almost done printing up all the frame stuff. Next I need to wind the coils and hookup the switching.

    BZ-MotorFrame_2.jpg

    BZ-MotorFrame_1.jpg

  2. #32
    It's ALIVE !!!!

    Hello Group,
    It's been awhile in the making but today I am ready to show this machine running. I made a video which is pretty long because I spent a lot of time trying to explain how it is all configured. Hopefully you will enjoy it.

    Here are a few stills of it:
    BZ-3D-1coil_1.jpg

    BZ-3D1coil_2.jpg

    BZ-3D1coil_3.jpg

    I go over it in detail in the video so I'm going to keep the text minimal but some basic info on it:
    It has one 30awg pickup coil which is feeding the solid state relay, one 21awg power coil, the magnets are 1/4 inch X 1/8th samarium cobolt, Obviously since I just said it , the switching is on a SSR and I have mode one and common ground configured on a switch.

    The video is showing it hooked up to several sources. I started on some 18650's and then some 9volt, and finished on regular garden batteries. I wanted to show how minimalist this thing can be by using the small batteries. The video is not of a full run, it's just a few min in each battery and in each mode.

    Let me know what you think,, thanks--Bob

    Link:
    https://1drv.ms/v/s!AmzmftzD-V0miGkfbDg45F0CEGbr

  3. #33
    That looks great Bob. Thanks for sharing!!

    DMann

  4. #34
    Member Ed_Morbus's Avatar
    Join Date
    Aug 2012
    Location
    Netherlands, The Hague
    Posts
    99
    That looks great Bob. Thanks for sharing!!
    you share STL files ?

  5. #35
    Very cool and clearly a lot of hard work.

  6. #36
    Very nice machine Bob, liked the video too. I soooo want a 3d printer.

  7. #37
    Thanks guys.

    I have started adding more coils and it's going well so far.

  8. #38
    Quote Originally Posted by BobZilla View Post
    Thanks guys.

    I have started adding more coils and it's going well so far.
    Looking forward to a video update.

  9. #39
    Posting a few pics today.

    I have added all the coils, 8 power and one genny. I did change the circuit around a bit when I added all the coils. I now have one SSR per coil with independent diodes. I found that the genny coil setup I was driving the single SSR with was not strong enough to drive the 8 new ones so I added a 18650 battery to supply the trigger for now.

    Brian I started a garden battery run a few hours ago and took some video so I will post something tomorrow as I monitor this run.

    Here are a few pics of it:

    BZ-DeskTop-1.jpg

    BZ-Desktop-2.jpg

  10. #40
    Solavei
    Bob
    Nice work, i hope it is doing well for you.
    Happy testing

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •