Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 150 118 90 2 SEATS AVAILABLE! - 2018 ENERGY CONFERENCE

Monero XMR

Page 30 of 31 FirstFirst ... 2028293031 LastLast
Results 291 to 300 of 305

Thread: John Bedini's Magnetic Model

  1. #291
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    I haven't seen a difference using those methods that I've tried in the past.
    Hi Aaron,
    You are right..its not difference that i'm talking about...its the two equivalent ways that do the same thing is what i meant...
    Rgds,
    Faraday88.
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  2. #292
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    For example in the Kromrey machine, if the magnets are weak enough, you can pull and stretch the field out and away as if it is taffy - really flexible. On a neo, it's like plucking a string wound way too tight, you don't get much of that flexibility.
    Hi Aaron,
    I see another difference...the Electrical Conductivity of the Neo's is higher than those of the Ceramic..The Neo's in a Monopole are a advantage while in a Flux gate switching like in the G-field/kromrey the Ceramics are suitable since the gap between the magnet and the pole piece represent(Dynamic) the effective Bloch wall and the true static Bloch wall become dissipative if the magnets are Electrically cnductive like in the Neo's.
    Rgds,
    Faraday88.
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  3. #293
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Faraday88 View Post
    Hi Aaron,
    It is a delight to hear on the Bloch wall pump more since this is applicable even to the G-field Generator, accept that it (the bloch wall) gets éxtended' at the Gap (between the pole pieces of the stator magnets and the rotor coils) and the Polarity (NS) shows up in electrical circuit of the coils.
    I think i can explain the bloch wall pump action of JB's two diagrams in short: it can be described in terms of the ''Inside'' and ''Outside'' of a Magnet's Field..Attachment 5937
    Here i attached the structure of the Magnetic field as i see it and have recently constructed it and run tested to show the performance in how it charges the battery as compared to the normal Monopole structure commonly known. watch carefully how the Magnets are oriented and also the circular magnets making the Virtual S-pole become Real to add to the Induction Field.
    I know I sound vauge right now, but will soon elaborate on what exactly I mean by the ''Inside'' and ''Outside''
    any comments are welcome...
    Rgds,
    Faraday88.
    Hi Aaron,
    The mechanism of the Bloch wall pumping action was apparent to me in the Kromrey DVD, where JB shows the flexing width of the Bloch wall, and this has to do with the 3-flipps of the Magnets orientation (Gyroscopic flipps).
    As I already mentioned in my previous post on how the Magnets interacts with the Coil say in the SG machine, I would elaborate it here now: The Actual Direction of the Magnets full interaction with the coil as per the N-Facing to the Coil is towrads it such that the Magnet passes through the coil.. but this cannot be done as the core would come on its path. There is another way if one wishes to maintain this method..and that is have the Core external such that you have a ferromagnetic toroid covering the coil. well, i shall explain that at a later point. comming back to the Magnet direction external to the coil..
    To maintain the unidirection of the Magnet you needs to orient the magnet in the 3-axis of the Gyroscopic rotations, but again you cannot do the 3-axis in one coil at the same time..hence you need 3 coils spaced 120 degrees in relation to each other, to do each axis in each coil at the same time. This is the basis of the 3-pole-monopole. What you acheive is in essence is that you have brought the 'Inside' (Bloch wall) Out by making the 'Outside'(Dipolarity) a part of the 'Inside'.
    The 3-flipp Gyroscopic rotation in essence flexes(pumps) the Bloch wall in the geometrical shape of the Magnet..for example in a typical ceramic magnet which is rectangular shape.. flexes the Bloch wall in three unequal different widths (exactly like what JB showed in the dvd), if one uses a cubical shaped Magnets then accordingly you would flex the Bloch wall in three equal alterations.
    The charging of the secondary batteries is like no other with this configuration of the monopole machine and an amazing self start free flaoting of the rotor upon power application is synounmous 20180117_100636[1].jpg
    Last edited by Faraday88; 01-17-2018 at 02:57 AM. Reason: correction
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  4. #294
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    Haven't see those vids since they came out, but any dipole that polarizes the aether and has a conduction so that the positive potential turns into EMF can move to the lower potential and get dissipated to a degree on the way is happening in every circuit all the time.

    The virtual poles always seemed very real to me - just stronger per area (more focused).

    Later, I'll show something I came up with years ago to enhance the Q1, Q2 (scalar poles) to make the rotor turn even faster with less input. Actually part of an addendum to go with the SG trilogy - don't want to get into that right here at this point.

    Isn't that structure intrinsic in any rotor for the SG if all like poles are facing out?

    What voltage before being loaded? Input or output battery?
    'The virtual poles always seemed very real to me - just stronger per area (more focused).'
    Aaron...Yes the virtual Pole (S-pole in the case discuss here) may be more Electrical than Magnetic only transformed in the real space.
    im on the way to club these and present them here if i succeed!!!
    Rgds,
    Faraday88.
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  5. #295
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    Ok, I'll give you the little trick I came up with years ago that strengthens the south superpole poking out between the magnets. You can draw it out and predict where the North face of the disc magnets want to go. This always works, does the strengthening without making the faces of the magnets stronger, which would be undesirable, but it makes it run faster, which will of course reduce the input draw.

    If any of you try it, please post your results. For practicality of the ring magnet size, its easiest of course on smaller rotors. But the idea can obviously be applied with magnets strategically embedded into larger rotors to give the same effect.



    You can see the idea in the sketch - more than an idea, it works because I've done it on multiple smaller SG's and it always speeds up the rotor with reduced current.

    If you have north out on the magnets, superpole south squeezes out between the magnets as shown.

    Drawing shows 1 ring magnet on shaft, but use 2 - one on each side of the rotor. When Yaro was experimenting with a magnet and the ZFM, it reminded me of this so here it is. This is obviously simpler than the ZFM arrangement with 2 different poles on the rotor but I believe it can be applied to that when tweaked according to the fields on the rotor.

    Make sure the face of the disc magnet facing the rotor is the polarity of the superpole squeezing out between the magnets. So obviously when you try to move the disc magnets towards the rotor they'll want to repel. Push them there and glue them, whatever. The S faces on disc magnets will push on those superpole south fields and will density them so they will be stronger squeezing out between the norths.

    First test I ever did was on the little pink roller skate wheel SG I have. I put the disk magnets on the shaft both sides like this. As they got closer to the rotor as the rotor was spinning, the repulsion was obvious so bit by bit, I forced them closer and closer and the wheel sped up and current dropped.

    You can obviously put stronger magnets on the rotor to get a stronger superpole, but the point is to do this without increasing the actual strength of the magnets on the rotor.
    Hi Aaron,
    I would place that magnet closer to the rotor..or actually with the rotor...and with some other changes..acheive what you said without increasing the strength, because the scalar -south is increased anyway because of the transformation i did to it that way. Eureka!! this is like Tesla was born before Faraday
    all in one man!!!...
    Rgds,
    Faraday88.
    Last edited by Faraday88; 01-17-2018 at 09:45 AM. Reason: addition
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  6. #296
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,243
    Blog Entries
    1
    Quote Originally Posted by Faraday88 View Post
    Hi Aaron,
    I would place that magnet closer to the rotor..or actually with the rotor...and with some other changes..acheive what you said without increasing the strength, because the scalar -south is increased anyway because of the transformation i did to it that way. Eureka!! this is like Tesla was born before Faraday
    all in one man!!!...
    Rgds,
    Faraday88.
    It's supposed to be placed as close as possible. I have it at a distance to draw the concept easier. It works indisputably and gives a much faster speed with much less input. I've done it a thousand times with various SG's that I've built over the years. It's of course easier and more practical with small diameter rotors - with a single magnet anyway. I put one on both sides of the rotor facing each other. Depending on the strength, it is not always desirable to put them on the rotor such as if using larger neons on the shaft but if using ceramic discs then of course they can be right on or by the rotor.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  7. #297
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,243
    Blog Entries
    1
    I saw your help request about an attachment. I emailed you and it said the account is no longer valid. Please check your account settings that you have an updated email. For attachments, you should be able to open them all when logged in. What is the link to the message with an attachment that you can't open?
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  8. #298
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    I saw your help request about an attachment. I emailed you and it said the account is no longer valid. Please check your account settings that you have an updated email. For attachments, you should be able to open them all when logged in. What is the link to the message with an attachment that you can't open?
    Hi Aaron,
    Here below is the attachment details if you could retrive it for me..its for the post no.6 of the same thread here.
    Rgds,
    Faraday88

    Hi Guys,
    Here is another view of the 'True' Monopole RotorAttachment 5939
    you may compare this with what is present in the JB website drawn by jb him self, it isdifferent only slightly..let me know where is the difference you see in these two..?
    Rgds,
    Faraday88
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

  9. #299
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,243
    Blog Entries
    1
    Quote Originally Posted by Faraday88 View Post
    Hi Aaron,
    Here below is the attachment details if you could retrive it for me..its for the post no.6 of the same thread here.
    Rgds,
    Faraday88

    Hi Guys,
    Here is another view of the 'True' Monopole RotorAttachment 5939
    you may compare this with what is present in the JB website drawn by jb him self, it isdifferent only slightly..let me know where is the difference you see in these two..?
    Rgds,
    Faraday88
    For post #6 - it shows as a post by Minoly with a youtube video. Different than what you are description. Please post the permalink for that post, it is at the top right corner of the post with the #____ - I need the url.

    Thanks.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  10. #300
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,398
    Quote Originally Posted by Aaron Murakami View Post
    For post #6 - it shows as a post by Minoly with a youtube video. Different than what you are description. Please post the permalink for that post, it is at the top right corner of the post with the #____ - I need the url.

    Thanks.
    Hi Aaron,
    Very well...I just realized what i meant to show at that time..however, now i have an advanced understanding of what i intended to show here.. now its irrelavant..
    Thanks anyways!!
    Rgds,
    Faraday88.
    'The Magnetic Field is the gatekeeper of the Wheather on the Earth'' - John Bedini.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •