Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 150 118 90 10 SEATS AVAILABLE! - 2018 ENERGY CONFERENCE

Monero XMR

Page 29 of 30 FirstFirst ... 1927282930 LastLast
Results 281 to 290 of 291

Thread: Kromrey Disclosure - Bedini SG - Beyond the Advanced Handbook by Peter Lindemann

  1. #281
    Hi Richard,

    Ask your self why JB twist's up together the Trigger and all drive strands on SG/SSG coils (Energizer), JB also said not to twist the coils strands on a window motor or on a Zero Force Motor (Torque). What is going on with the Heaviside Flow around the wires, and how the twist effects the Polyting (sp) flow? What geometric patterns would various numbers of strands create in the Ather around the twisted strands....? Can you visualize these patterns in the Aether around a wire with the Bloch Wall in the center of the stretched out Strands? like a high line wire..... then what does the Ather/Heaviside Flow geometric patterns around a muilty strand twisted coil with various strand counts look like...?

    Much like Litzed Magnet Wire in commercial app's.... Why...?

    NOW, Ask your self why a muilty strand Twisted coil, with the strands in a series adding config like the Tesla Pancake Coil Patent, works better for a Genny coil than a single strand coil with the same length of wire.

    Now visualize commercial Litzed Magnet Wire in a series adding config like the Tesla Pancake Coil Patent...... Or on a SG/SSG muilty strand coil..... why...?

    Ask you self what would happen if you rotated that Genny coil 90deg to the rotor magnets much like a Window Motor and ZF motor works. How will that effect the drag on the rotor from that genny coil, compared to the standard core end facing the rotor if they are both shorted, and just current flowing through the coil (A Load on the Rotor)...?
    Last edited by RS_; 05-18-2018 at 02:31 PM.

  2. #282
    Hi,

    I now have more things to think about thanks Faraday88 and RS again. Never played that much with coils in my electronic work except for coils needed in radios for tuning circuits or video descramblers for watching free movies.

    I am using an old car battery for the charge battery (9.4v) and wondering if I should use the same type of battery that I am using as the primary battery discharged to 12v? I did not see anything in the SG books about the charge battery type and yes this would be the situation if I was to switch batteries when charging is done. I have to get an inverter to discharge the other battery I have that is the same as the primary battery.

    I'm getting closer to what I am trying to get.

    Richard (rdvideo)

  3. #283
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,325
    [QUOTE=rdvideo;28577]Hi,

    I now have more things to think about thanks Faraday88 and RS again. Never played that much with coils in my electronic work except for coils needed in radios for tuning circuits or video descramblers for watching free movies.

    I am using an old car battery for the charge battery (9.4v) and wondering if I should use the same type of battery that I am using as the primary battery discharged to 12v? I did not see anything in the SG books about the charge battery type and yes this would be the situation if I was to switch batteries when charging is done. I have to get an inverter to discharge the other battery I have that is the same as the primary battery.

    I'm getting closer to what I am trying to get.

    Richard (rdvideo)[


    Hi rdvideo,
    Conventional text books never teach you this fact of the Heaviside component of a Electromagnetic coil.
    the gate way to excess Energy 'infusion' in a circuit. I suggest you to read Tom bearden's website on the EFTV and how well he describes the broken symmetry (Asymmetry) and siponing 'excess' Energy from the Vacuum or the aether,by any dipolarity element (Magnetic /electric)
    Rgds,
    Faraday88
    'Teaching can endure a quest for knowledge..but Learning solves an anomaly'

  4. #284
    On SG/SSG's it is always best to start out with new batterys for both primary and secondary batterys.
    Old sultanated battery's are for later when you know more, and have a setup that can desultanate them.......

  5. #285
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,325
    [QUOTE=Faraday88;28578][QUOTE=rdvideo;28577]Hi,

    I now have more things to think about thanks Faraday88 and RS again. Never played that much with coils in my electronic work except for coils needed in radios for tuning circuits or video descramblers for watching free movies.

    I am using an old car battery for the charge battery (9.4v) and wondering if I should use the same type of battery that I am using as the primary battery discharged to 12v? I did not see anything in the SG books about the charge battery type and yes this would be the situation if I was to switch batteries when charging is done. I have to get an inverter to discharge the other battery I have that is the same as the primary battery.

    I'm getting closer to what I am trying to get.

    Richard (rdvideo)[


    Hi rdvideo,
    Conventional text books never teach you this fact of the Heaviside component of a Electromagnetic coil.
    the gate way to excess Energy 'infusion' in a circuit. I suggest you to read Tom bearden's website on the EFTV and how well he describes the broken symmetry (Asymmetry) and siponing 'excess' Energy from the Vacuum or the aether,by any dipolarity element (Magnetic /electric)
    Rgds,
    Faraday88[/QUOTE

    Hi rdvideo,
    Just my few cent on the conversion process where the Poynting vector is additive to the Heaviside component flow..look the constants(Permitivity/ permeability) of the conductor become indistinguishable when the condition is met.Heaviside component.jpg
    Rgds,
    Faraday88.
    Last edited by Faraday88; 05-17-2018 at 12:04 AM. Reason: pic addition
    'Teaching can endure a quest for knowledge..but Learning solves an anomaly'

  6. #286
    Senior Member John_Koorn's Avatar
    Join Date
    Jul 2012
    Location
    Melbourne, Australia
    Posts
    1,025
    Hi Richard,

    RS_ is right here. Please do yourself a favour and leave the 9.4V crappy battery for later on. You'll do much better understanding this tech if you learn with good equipment from the get go.

    Believe me that your 9.4V junk battery and a good 12v battery will behave completely differently. In fact, you won't even be able to tune your setup properly with that junk battery.

    John K.

  7. #287
    Thanks for the info.

    Waiting for inverter to arrive to discharge second battery I have. I could use the small 12v fans that I used for discharging when I built my first SSG using 7AH sealed batteries. I want to desulfate a battery, but your right, wait to later and use the cap dump to charge a battery as JB explained in his DVD so that you can switch the primary battery with the charge battery. I recall that JB talked about swapping batteries (primary and charge) and mentioned that if you want to swap batteries that the charge battery is charged using a cap dump and would not work after a while if you didn't.

    I look at using a cap dump as an isolation circuit that the SSG will see to help keep it tuned. I keep watching Part 37 "The Linear Amplifier Regulator" and more parts to get while waiting for inverter since I plan on eventually using a bank of batteries like a solar or wind generator would use. Slowly building up to that time. I will try the light bulb in the trigger circuit to see how the circuit acts as an experiment. In electronics, I see the light bulb as a constant current source which many ckt's, especially in audio equipment use. I'm curious about it and never knew about it until I seen Ron Pugh's circuit in Chapter 6: Pulse-Charging Battery Systems from "A Practical Guide to Free-Energy Devices" by Patrick J. Kelly I came across some years back after learning about JB and his work. Then RS has it in his ckt's, but why did it burn out in the presentation, not the right type of bulb? Ron Pugh's ckt used a 6W 12v car bulb in series with a 100 ohm resister and a 100 ohm pot and also a 470 ohm base resistor. Just curious...

    Thanks for feedback John, been a while since you commented on a post I made back a few years when I questioned PL and Aaron about where is the third SG book since it was mentioned about in book 1 and 2. You asked why I like to see a 3rd book, well, we do have a new coil to play with now. Peter and Aaron did a great job with the third book.

    Well, back to the drawing board, working on a battery swapper for the SSG. Thanks again...

    Richard D.

  8. #288
    Richard,

    The Bulb blew out at the conference because We got in a hurry, and did not install the SG output cables.....
    MY BAD.....!!!

  9. #289
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,325
    Quote Originally Posted by RS_ View Post
    Richard,

    The Bulb blew out at the conference because We got in a hurry, and did not install the SG output cables.....
    MY BAD.....!!!
    Hi RS,
    Wonder how an incandecent bulb can blow up when the out put is unhooked? unless the trigger is really very strong..
    Rgds,
    Faraday88.
    'Teaching can endure a quest for knowledge..but Learning solves an anomaly'

  10. #290
    just lucky that it did not kill the Transistor, and just the killed bulb ....

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •