Hi Why-me,
This is a discussion thread for the aforementioned e-book, not a help site.
Can I suggest you contact the publisher with your request? http://bedinisg.com/contact.php
(Link taken from the site where the e-book is offered for sale)
John K.
Aln's solution in post 13 seems to be a solution.
But I find it beyond extraordinary that the author/publishers do not crank out some print-on-demand copies for the many people who don't like ebooks (which evaporate if the laptop crashes, is stolen or succumbs to a glass of orange juice spilt all over it).
Last edited by wrtner; 08-19-2016 at 06:06 AM.
What I do for Eric Dollard since he doesn't have a computer is I print out his powerpoints and books and I take them to a FedEx copy shop.
For about $5, they will make it spiral bound with a frosted cover and black or blue back cover.
For the printing, it takes a long time to print color both sides and I can't offer that service because it will tie up my personal printer.
As suggested by aln, if you put it on a flash drive and take it to a shop like that, they can print it out for you color on both pages and bind it for you.
We will be putting all our books on Amazon as paperbacks - just not enough hours in the day to get them all done fast. Plus, they all have to be reformatted for the paperback book templates. It is way more time consuming that it seems.
You can email Jeff at help at emediapress dot com and ask him if he is willing to do it for you and what he would charge to do that on top of the cost of paper and ink.
Whatever is 'repeated'..... Further to the Advanced handbook has definitely given the clue to merge the link between the 'Generator' and the 'Energiser' aspect of this entire episode of the Bedini technology. if you study it up close i would say that the 1984 machine is rather a MOTOR alone split in its construction, while the SSG is a ENERGIZER alone Combined in its construction, now, you give the other what the first lacks and Voila!!! you will have them both as one structure which is what is shown in the Further to the Advance book..!
and yes!! the 1984 machine (JB's not Jim watson's) is a Pulsed Motor of one scale down to the Gray Motor in a way, as POWER Pulse is fed back to the SINGLE BATTERY...
all one needs to do is figure out the TRIGGER in each case...
There is one more hint i would like to bring to every ones notice.... refer John's website for the SINGLE BATTERY 1984 Machine ('WARNING HIGH-VOLTAGE ENERGISER') of JB:
if you closely observe the original picture there and compare it with the same photo used in the Advanced Hand book.. there is Capacitor Included in the new picture (absent in JB's old website photo for the same photo)..now ! what is different?? Yes both work but some thing in terms of configuration is required to be done in each case of the presentation, which is not mentioned for all!!! the new one that includes the Capacitor is meant for the Watson Machine which is more power ful:
Rgds,
Faraday88.
Last edited by Faraday88; 08-20-2016 at 03:06 AM.
'Teaching can endure a quest for knowledge..but Learning solves an anomaly'
Trying to covert my sg to beyond advanced mode.I have 24 volt operation, 18 awg coils 100 FT 220 ohm base resistors.I taken the emitter off the 2 negatives ( primary and secondary )put a diode in between.Primary battery is 24 volts .secondry battery is 12 volts. running 2 coils .Its starts off but then slows down and stops.Do i need to change the base resistors and what size pot do i need for 18 gauge wire?can any one help me out? cheers Jason
Hi Jason,
You shouldn't need to modify the SG circuit in any way to get it running. All you need to do to is connect the 24V positive to the SG input positive, the 12V positive to the SG input negative and the 24V negative to the 12V negative.
If you don't have the pickup winding on the coil to feed the SG output back to the 12V battery, just connect the SG output to a 4th battery.
I'm assuming you purchased Peter's presentation, otherwise the above may not make sense.
John K.
Thanks for your reply.Yes i have got peters presentation.So the 24 volt (witch is the input)positive is connected to the top of the coil.The 12 volt (out put battery)positive is connected to the emitter (which use to be the input negative).The 2 negatives are joined together.I double checked this but i cannot get it up to speed.It goes but then it slows down and stops.The neo bulbs came on as well when it was on.![]()
Bookmarks