Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


ONLY 150 118 90 2 SEATS AVAILABLE! - 2018 ENERGY CONFERENCE

Monero XMR

Page 34 of 34 FirstFirst ... 24323334
Results 331 to 333 of 333

Thread: Zero Force Motor Replication Project

  1. #331
    Networking Architect Aaron Murakami's Avatar
    Join Date
    Jul 2012
    Location
    Spokane, Washington
    Posts
    1,241
    Blog Entries
    1
    Hi Christian,

    It looks like your coils are turned 90 degrees compared to the ZFM. Is that intentional? ZFM has magnets moving from one pole to the other as far as direction is concerned and you seem to have one pole only facing the rotor.
    Aaron Murakami





    You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete.” ― Richard Buckminster Fuller

  2. #332

    Interesting setups!

    Hi Cristian,

    Thank you for all your efforts to make these very interesting pulse motors and the videos on them. My heart was braking with sorrow when you put to pieces that 6 coil motor, LOL. But I know that your intention was to show everything and you did.

    In your latest video I think you used again the same heavy rotor (it has 4 kg mass) what you already used in the pitbull pulse motor setup, right? It is interesting to compare the results of the two different pulse motors running the same heavy rotor mass.
    (I think the pitbull pulse motor run at 9 V and drew around 410 mA and the RPM was around 1200.)

    Greetings
    Gyula

    PS Here is a google translation of the above text into Spanish, to make it easier for Cristian to understand everything.

    Hola Cristian,
    Gracias por todos sus esfuerzos para hacer estos motores de pulso muy interesantes y los videos que aparecen en ellos. Mi corazón estaba frenando de dolor cuando destrozaste ese motor de 6 bobinas, LOL. Pero sé que tu intención era mostrar todo y lo hiciste.

    En tu último video , creo que usaste nuevamente el mismo rotor pesado (tiene 4 kg de masa) lo que ya usaste en el pitbull configuración del motor de impulsos , ¿verdad? Es interesante comparar los resultados de los dos motores de impulsos diferentes que funcionan con la misma masa de rotor pesado.
    (Creo que el motor de pulso pitbull funciona a 9 V y dibujaba alrededor de 410 mA y el RPM era alrededor de 1200).

    Saludos
    Gyula
    Last edited by Gyula; 02-07-2018 at 01:30 AM.

  3. #333
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    268

    Dueling ZFM's

    Hello to all and Happy Spring,

    James McD and I had our annual Bedini fest where we devote three days to various experiments related to our current experimental interests. This year's fest was devoted mostly to the ZFM and we managed to accomplish many different and interesting experiments. The more interesting results will be presented in late spring and then in early summer at the 2018 Energy Conference.

    The experimental results of a couple of them will require verification from other experimenters due to there unusual nature. These will be revealed at the Conference.

    Anyway, James came up with a fun experiment where one would take the reversing polarity voltage that is fed to the ZFM's coils by the Bipolar switch and then also input this directly to an AC-DC power supply. The input to the ZFM's coils is a high frequency DC voltage that can be described as having an AC type of nature and the AC-DC power supply should convert this input to a DC voltage output that can then be fed to the another ZFM's power input. Whew! Will this work?

    Well the JZFM was cranked up and the input voltage adjusted to 28.38v yielding 5315 RPM at 1.01A. The output from the AC-DC power supply rose to about 50v or so before the other ZFM was powered up. Upon power up of the other ZFM this AC-DC output voltage dropped to 28v or so. The other ZFM accelerated to 8074 RPM at 25.7v and 0.5A. The amperage on the primary PS jumped to 1.717A to reflect the increased load and voltage remained relatively stable.



    So everything worked as James had envisioned and the experiment was a tremendous success and a very fun test. BTW nothing blew up and everything continued to run smoothly without any excessive overheating. No OU was expected here and none observed. Not all experiments end this well...
    Yaro

    "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •