Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


PRE-REGISTER FOR THE*** 2018 ENERGY CONFERENCE ***

Page 28 of 28 FirstFirst ... 18262728
Results 271 to 277 of 277

Thread: Zero Force Motor Replication Project

  1. #271
    Senior Member James McDonald's Avatar
    Join Date
    Jul 2012
    Location
    Odenton, Maryland
    Posts
    118
    Quote Originally Posted by RS_ View Post
    Hi guys, this is Chad on RS's computer. I'm up at his shop for a few days.. We are working on all the projects for the museum. Right now I'm working on a hand crank generator. I'm looking for all the tricks in lowering Lenz drag in generator mode under load. My question here is, have you had a chance or the ability to manually spin up a ZFM using a drill, or any other prime mover...? I'm curious if the ZFM can generate voltage and current, and if so, does the load take off put resistance on the prime mover, and make it pull more current...? We understand that the ZFM is a bloch wall motor.. Is the ZFM also a BLOCH wall generator...??
    Hi Chad --

    I have hooked my Zero Force Motor up to a Capacitor Dump Circuit and the output spike from the Coils I measured was double the input voltage. At the time I did this experiment I was running my ZFM on one 12 volt battery and charging a second 12 volt battery through my capacitor dump circuit. The results were it was charging the battery but at the spike level it would take more then likely 2 weeks of running to charge a battery. You would be charging the run battery before the charge battery was even 10% charged. My Zero Force Motor board has timing LED's on it and when you spin the rotor and shaft with no battery hooked up the timing LED's do light up so long as the rotor is turning. My guess is at least 25 mili-amps is flowing through the un-powered ZFM board. As far as a BLOCH wall generator it would depend on how much current and voltage you are trying to generate. The LED's lighting up shows its generating voltage and current.

    -- James

  2. #272
    Senior Member James McDonald's Avatar
    Join Date
    Jul 2012
    Location
    Odenton, Maryland
    Posts
    118

    Zero Force Motor Improvements Since April 2017

    Hi All --

    I did a video last night on a few improvements to my Zero Force Motor. The motor is only
    running on +24 volts of Lead Acid batteries so the RPM's are not over 3500 RPM in this video.
    The new stronger Neo magnets do provide a lot more torque but they do reduce the RPM some.
    I found that running my ZFM in the CCW direction I get more torque but around 500 RPM less
    speed then the CW direction with slightly less torque then the CCW direction. I also found out
    that depending on the type of timing magnet you use you will have to be careful of the North
    South directions they are facing towards the front of the motor. The magnet type I used requires
    one to be North facing forward and the other being South facing forward or the motor will not
    run. The results are a high current draw that can damage the transistors. Make sure you hook up
    a current meter to watch the current draw on your first power up of your ZFM build.

    Enjoy the video!!!

    https://www.youtube.com/watch?v=mRfm5lFc3TI

    -- James McDonald

  3. #273
    James nice video, when the machine turns off it produces high voltage spikes... It reminds me of a generator John Bedini said he experimented with in his 1984 book.

    Attached Images Attached Images

  4. #274
    Quote Originally Posted by Dave Wing View Post
    James nice video, when the machine turns off it produces high voltage spikes... It reminds me of a generator John Bedini said he experimented with in his 1984 book.

    Of course, those two tank circuits will want to be driven at a particular frequency - or octave.

  5. #275
    Senior Member Faraday88's Avatar
    Join Date
    Sep 2012
    Location
    Bangaluru, Karnataka, India
    Posts
    1,117
    Quote Originally Posted by wrtner View Post
    Of course, those two tank circuits will want to be driven at a particular frequency - or octave.
    Hi ,

    This diagram pertains only about the Monopole Energiser for the Single Battery system, think again those Capacitors could only be representing the state of the coils in that configurations and not as actual lumped physical Capacitors!!
    Rgds,
    Faraday88.
    Last edited by Faraday88; 08-30-2017 at 11:18 PM. Reason: correction
    ''Knowledge hails from the Past and its people...The Future is only its Arena of realization''

  6. #276
    Senior Member James McDonald's Avatar
    Join Date
    Jul 2012
    Location
    Odenton, Maryland
    Posts
    118

    Zero Force Motor Running on a 100 Watt Solar Panel

    Hi All --

    I just wanted to post a quick link to my latest video showing the Zero Force Motor running on Solar Power.
    The solar panel is a 100 watt 4 amp solar panel and the peak voltage output in full sun is 22 volts.

    Enjoy the video.


    https://www.youtube.com/watch?v=utjk-PT7mFo&feature=youtu.be


    -- James McDonald
    Last edited by James McDonald; 09-04-2017 at 02:29 PM.

  7. #277
    Senior Member Yaro1776's Avatar
    Join Date
    Aug 2012
    Location
    Heart of Vermont
    Posts
    221
    Hey James,

    Thanks for the demonstration video mating the ZFM with a solar panel. An instructive and fun video, a quick tip of the hat to you. So what happens when the voltage is ramped up? - can't wait for the next episode!

    It works...
    Yaro

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •