Announcement

Collapse
No announcement yet.

PEMF technology

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PEMF technology

    I was told there was a great thread here about PEMF technologies. What happened to it?

  • #2
    What is a Pulsed Electromagnetic Field (or PEMF) Device?

    Any living organism contains electromagnetic energy that is created by electrical activity. That electrical activity is how the cells communicate, it’s what makes the cells operate and ultimately, what keeps the organism alive. If the electrical activity, or EM field, is removed, the organism dies. These electromagnetic fields control the chemical reactions that take place within the overall system. Reductions of, or adverse alterations to the electromagnetic activity within the organism can create an unhealthy state. This can also make it susceptible to various diseases, conditions or ailments and/or make it more difficult to correct the diseases, conditions or ailments. At the same time, correcting or increasing the EM fields has been shown to help to correct those diseases, conditions or ailments.

    Each cell in our body has an electric potential, or electromagnetic field. Every time your heart beats it generates electromagnetic waves that flow through the circulatory systems and in turn throughout the entire body, affecting all those cellular fields. In addition, outside magnetic fields also influence the cellular system in a positive or negative manner, depending on the type and strength of that magnetic field.

    There are now dozens of different Pulsed Electromagnetic Field (PEMF) devices produced and sold around the world. The primary theory of a PEMF is that by creating a pulsed EM field, of the correct frequencies, it is possible to balance, or correct, those cellular EM fields that are either unbalanced or have low energy levels. It seems as though the in depth definition for PEMF devices are different on nearly every website and the information provided by the various PEMF manufacturers tailor their definitions so as to promote their specific product(s) with little or no scientific argument offered to substantiate or prove their claims.

    Wikipedia Website Definition of PEMF Technology

    Pulsed electromagnetic field therapy (PEMFT), also called pulsed magnetic therapy, pulse magnetotherapy, or PEMF, is a reparative technique most commonly used in the field of orthopedics for the treatment of non-union fractures, failed fusions, congenital pseudarthrosis and depression2. In the case of bone healing, PEMF uses electrical energy to direct a series of magnetic pulses through injured tissue whereby each magnetic pulse induces a tiny electrical signal that stimulates cellular repair. Many studies have also demonstrated the effectiveness of PEMF in healing soft-tissue wounds; suppressing inflammatory responses at the cell membrane level to alleviate pain, and increasing range of motion. The value of pulsed electromagnetic field therapy has been shown to cover a wide range of conditions, with well documented trials carried out by hospitals, rheumatologists, physiotherapists and neurologists. There are several electrical stimulation therapy devices, approved by the FDA, that are widely available to patients for use. These devices provide an additive solution that aid in bone growth repair and depression.

    How often and why should someone use a PEMF unit?

    Dr. William Pawluk, MD, MSc, responds, “Magnetic fields selected for treatment simultaneously provide health maintenance, not just treatment. PEMFs used in the home daily would be an important part of any prevention or health maintenance program, in addition to any treatment program. Magnetic therapies are usually complementary to other therapies, and they usually enhance each other’s benefits.”

    In conclusion, there are various types of PEMF units; high energy output, low energy output, high gauss, low gauss, preprogrammed, custom program per user by technician, but probably the most important difference is that of the Analog vs. Digital type devices. Please do your research and make sure you understand the difference, the pros and the cons of each.

    Comment


    • #3
      Originally posted by NRG2014 View Post
      What is a Pulsed Electromagnetic Field (or PEMF) Device?

      In conclusion, there are various types of PEMF units; high energy output, low energy output, high gauss, low gauss, preprogrammed, custom program per user by technician, but probably the most important difference is that of the Analog vs. Digital type devices. Please do your research and make sure you understand the difference, the pros and the cons of each.
      NRG2014,
      I don't know if modalities of electromedicine such as the Tesla Violet Ray Wand and Lahkovsky Multiwave Oscillator would apply here. One explanation of their effect, which I quite like, is that these kinds of devices restore the capacitive nature of our body's cells. And I would say that this in turn enables them to produce the appropriate EM activity you describe. The pre 1940s Tesla Violet Ray Want and Lahkovsky MWO would be my two favourites for this reason. There is also the Beck pulser for blood purification, but I'd regard that as a different animal entirely, and obviously not analog.
      My 2Cents.
      Bob

      Comment


      • #4
        Thanks Bob
        Both the Violet Ray wand and the MWO are technologies that just put the frequencies out there for the body to use. The majority of the "modern" PEMF use digital frequency generators that emit specific digital frequency signals in hopes that they are hitting the correct signal ranges to be of assistance. I will post an article I wrote that discusses the differences between Digital and Analog electrotherapeutic devies.

        Comment


        • #5
          Analog vs. Digital Electrotherapeutics Part 1
          (Specifically Pulsed Electromagnetic Field Technologies)

          PEMF? What are we talking about?

          PEMF explanations can get very technical, so we’ll get into those in a bit. Simply put:
          PEMF refers to a group for devices that help repair broken or stressed bones by directing a series of magnetic pulses through injured tissue, stimulating cellular repair. PEMF also helps in healing soft-tissue wounds; suppressing inflammatory responses at the cell membrane level to alleviate pain, and increasing range of the motion.

          The value of pulsed electromagnetic field therapy has been shown to cover a wide range of conditions, with well documented trials carried out by hospitals, rheumatologists, physiotherapists and neurologists.

          For years many Pulsed Electromagnetic Field devices or PEMF’s, whether digital or analog, have all been viewed as the exact same technologies, merely offered in different packaging. However, that similarity would be like saying that a $650,000 McLaren and a Yugo are both cars. Certainly they both have wheels and both engage by pushing the accelerator, but the similarities end there.

          In order to explain the differences between Analog and Digital PEMF devices, we first need to explain what a PEMF device actually is. There are a number of PEMF manufacturer websites, all attempting to market various alternative electro-therapeutic devices and technologies and it would seem that each has their own definition of what a PEMF actually is. Their descriptions of a PEMF, not so surprisingly, are tailored specifically to the unit that they manufacture or sell. There are even websites that claim to be “non-biased”, benevolently disseminating the truth about PEMF technologies, when in fact, the site is owned and operated by the people that are selling the units that they are actually promoting. Although this article does promote a specific type of PEMF device, please be aware that all the information and descriptions originate from totally independent sources.

          So, let’s go back to the cars. McLaren may define a car as a luxury vehicle that can take you in style anywhere you want to go at 180 mph. While Toyota may describe a car as a vehicle that can get you to anywhere you want to go with 50 mpg. Notice there is really only one letter difference; the “H” (mph) and the “G” (mpg), but the difference in price is about $600,000 and, as we certainly can all agree, luxury and performance level as well. The information provided by PEMF manufacturers tailors their definition of PEMF so as to promote their product(s) with little or no scientific argument offered to substantiate or prove their claims.

          The only difference between the PEMF units discussed here, in this article, will be the difference between digital and analog. Many people say that digital is better because far more information can be stored and/or delivered through digital output compared to analog output. When it comes to influencing the human body with electrotherapeutic technologies, we believe that this is a very inaccurate statement.

          It is also important to clarify that a PEMF and a Multi Wave Oscillator are two different types of devices. The Wikipedia Website definition of a MWO is as follows: With assistance from D'Arsonval, Georges Lakhovsky invented the Multiple Wave Oscillator, that Lakhovsky claimed would revitalize and strengthen the health of cells. The device consisted of two broadband antennae (a sending and a receiving pair) composed of concentric sets of curved open-ended copper pieces suspended / held in place by silk threads, two metal stands to hold the two antennae, Oudin coil(s), and electromagnetic spark / pulse generator. In June 1934 he was awarded U.S. patent 1962565[4] for the device. In 1932, Georges Lakhovsky used aluminum and in some models multi metal, air filled tubes bent into nested circular dipoles for the antennae in his Multi-Wave Oscillator.1

          Various Analog “PEMF” units, such as the “Biocharger”, use a very high voltage Tesla coil to bounce sparks off a series of plasma tubes filled with various gases to broadcast a huge range of frequencies to those nearby. Although these devices, technically could fall into the analog category, they are actually just a Multi Wave Oscillator and not a true PEMF. The great concern about these types of devices is, “What’s in the Bulbs or Tubes”? Some manufactures have been known to use things like Mercury, Cadmium, Bromine and other extremely toxic materials. You may ask, “Why is that a concern? They’re in sealed glass tubes.” The concern is that when a charge is applied to one of the tubes in order to create resonance emissions, anyone in close proximity is now resonating with the energetic potential of the substance in the tube. A familiar example would be a fluorescent light bulb. Within the glass bulb is a very small amount of mercury and usually argon gas under vacuum pressure; when charged, or excited, the mercury becomes a gas that emits mercury radiation. That radiation then reacts with a phosphor powder that coats the inside of the bulb and light is created. Please note that this creates “mercury radiation.” The actual distance in a normal household bulb, using standard 120 volts AC, are merely a couple feet, but what if the power source was 250,000 volts DC?

          History of PEMF - The use of magnetic field therapy in clinical applications dates back over 500 years. In the 15th century, Swiss physician and alchemist Paracelsus used lodestones, or naturally magnetized pieces of the mineral magnetite, to treat conditions such as epilepsy, diarrhea, and hemorrhage. He believed that the ability of magnets to attract iron could be replicated by attracting disease away from the body. In the late 18th century, the Austrian physician Franz Anton Mesmer, who originated the idea of "animal magnetism", described the healing properties of passing magnets over the open veins of patients.4 In the mid-19th century, magnetic ointments produced in New York were introduced as remedies for a whole spectrum of illnesses such as headaches, inflammation of the bowels, burns, fever sores, rheumatism, gout, and toothache.

          Although electricity’s potential to aid bone healing was reported as early as 1841, it was not until the mid-1950s that scientists seriously studied the subject. Fukada’s and Yasuda’s discovery of the electric potential of bone provides evidence of electricity’s effect in promoting osteogenesis (bone growth), particularly in long bone non-unions.5 During the 1970s, Bassett and his team introduced a new approach for the treatment of delayed fractures, a technique that employed a very specific biphasic low frequency signal 6,7,8,9 to be applied for non-union/delayed fractures. The use of electrical stimulation in the lumbosacral region was first attempted by Alan Dwyer of Australia. In 1974, he reported successful initiation of graft incorporation in 11 of 12 fusion patients. Since that time, electrical stimulation has been shown to significantly increase the probability of bony arthrodesis in spinal fusions.10,11
          In 1979 the FDA approved non-invasive devices using pulsed electromagnetic fields designed to stimulate bone growth.12

          In 2004, pulsed electromagnetic field system was approved by FDA as an adjunct to cervical fusion surgery in patients at high risk for non-fusion.13
          The use of PEMF stimulation has been found to be safe.14 It has also been proven safe and effective in treatment of delayed union in long bone fractures and patients at a risk of non-union following spinal fusion surgeries.

          In 1963, Antoine Prioré described a way to treat living cells through a specific production of “radiation” and using this process to “Trans-mutate” damaged or afflicted cells back into normal healthy cells. The “radiation” he was describing was a broadcast of Analog frequency patterns, or spectrums. 15,16
          Many PEMF manufacturers cite Prioré’s work to describe and validate how their systems work. For the most part, these are misleading claims, whether intentional or not. Prioré’s systems consisted of a massive computer system, a receiver, a transmitter, and a very large plasma tube suspended over a table upon which a person would lay. The computer's workings were analog in the truest sense -- processing complex information with tubes instead of chips. The receiver was also analog in nature. The shortened version of the concept was: a massive array of frequencies, broadcast, through the plasma tube, to a person lying on the table. A receiver would “pickup” the frequencies that were reflected back by the person’s body. Those frequencies would then be amplified and broadcast out through the plasma tube for a set period of time. This system would go through this cycle numerous times during which the resonance frequency patterns would be changed and updated as the person’s field changed. A standard session could last as long as eight hours.
          None of the manufacturers discuss how Prioré’s system actually worked. They just cite the theories behind the technology.
          In December 2001, Tom Bearden, Ph.D. described the Priore technology in his Patent Application for a Method, System and Apparatus for Conditioning Electromagnetic Potentials, Fields, and Waves to Treat and Alter Matter17. In that application, Bearden describes how Prioré’s device worked and how he intended to replicate it using modern equipment. Unfortunately, Bearden was attempting to replicate Prioré’s device using all digital equipment and has yet to accomplish his goal.

          Comment


          • #6
            Part 2
            In order to differentiate between digital and analog PEMF devices, we must first understand modern PEMF technology.

            Current, mainstream PEMF technologies create their frequencies using a computer frequency generator that can regulate both the frequencies and the pulse rates. The frequencies created are both specific in modulation and in range (i.e. the frequencies are limited to specific frequencies – 24 Hz, or for higher quality units, 24.35 Hz; the difference being the .35Hz or two decimal places). Either way, the output is limited to a specific Hertz. The way many PEMF device technologies attempt to overcome this limitation is to “cycle” through series of frequencies, intending to duplicate the selected frequencies series which are believed to influence the human body.

            The primary flaw in this concept is that the body’s cells (of which there are many1 and these are the parts of the body that are supposedly being influenced by these frequencies) are not specific, digital frequencies, but are analog in nature; consisting of a frequency spectrum of complicated sinusoidal waves. This will be explained further in this article.

            A second glitch with most PEMF units can be found in the delivery system. High-Voltage units such as the PAP-IMI, PEMF 4000, PEMF 100 or the Magnapulse work by creating a pulsed charge of electricity into the body. These charges can create substantial muscle contractions and many users refer to their exposure experience as quite painful. The PEMF 4000, PEMF 100 and the Magnapulse are all considered “mini PAP-IMI’S” or PAP-IMI like. Interesting to note, currently the PAP-IMI itself is banned from import into the United States due to numerous safety and marketing issues.

            Nearly all other PEMF units use an antenna or antenna array that delivers an ambient frequency broadcast, although there are a few that employ low voltage, direct contact. The major problem with an antenna type delivery system is the penetration of electromagnetic frequencies into the human body. ULF ( ultra low frequencies below 3 Hz) can penetrate nearly anything, so getting those frequencies into, say deep bone structure would be possible, but using ELF (frequencies ranging from 3 to 300 Hz) may not be able to penetrate as deep and higher frequency ranges may only penetrate to the depth of an organism’s skin. Direct contact delivery is accomplished using mats, pads, wraps, coils, cables, or other attachments. The vast majority of frequencies used by modern PEMF units are in the ELF or higher ranges.

            Most units used today compensate for this by “turning up” the amplitude, or volume. This increase of amplitude may aid in tissue penetration, to a point, but there is also the increased the possibility for adverse reactions. Unfortunately, the mindset is: if something doesn’t seem to work, up the dose, or in this case up the volume.

            Description of a High-Static, Pulsed Electromagnetic Field (HS-PEMF)

            A high-static, pulsed electromagnetic field device is a technology that uses a Pulsed Electromagnetic Frequency Field in combination with a contact system whereby the individual holds onto an energized plasma tube, with their feet on a charged “grounding” plate. This system creates what is referred to as a Bio-Compatible High-Static Delivery System, allowing for the total interaction between the PEMF system and the individual using it. This provides for a biofeedback loop to be formed whereby the individual’s own energetic systems seem to “pull” the frequencies that it requires, instead of using programmed frequency settings in hopes that they may help, but also tunes the amplitude of the field strength to the individual’s optimum level.

            In order to more easily describe what HS-PEMF technology is, we first will explain the differences between PEMF and a HS-PEMF. HS-PEMF technology is a totally unique science that conquers both of these deficits by creating Harmonic Resonance Frequency spectrums that are purely Analog and unique to each person. These frequencies are not “programmed” by a digital computer or frequency generator and then forced upon the individual’s system, as if each person were exactly the same. The uniqueness of the output frequency pattern suggests that the individual is actually part of the HS-PEMF tuning process. These findings cannot be overstated.

            A HS-PEMF system is a combination of these two developments and could be the most important breakthrough in Alternative Medical Device technologies to date. Its Unique Bio-Compatible High-Static delivery system is capable of delivering the frequency patterns throughout the body. A HS-PEMF is not an antenna broadcast system, but is a contact system that enables direct delivery throughout the entire organism. A HS-PEMF will never broadcast a series of fluctuating frequencies at varied pulse rates that may, or may not, have any positive effect on the human system.
            What are the Primary Differences between an Analog and Digital PEMF Devices?

            The obvious differentiation between the two, are that one is analog and the other digital. The most profound difference, however, is in how they interact with the human system. The human bio-energy system is not made up of various circuit boards and chips. The human bio-energy system is organic. It is comprised of atoms, molecules, cells, and intricate interdependent bodily systems which are organic. These systems communicate via analog frequencies and light pulses.

            Can an analog system be affected by a digital output? The simple answer is yes, most definitely. Many governmental, military and law enforcement agencies are using “Digital Output” broadcast devices for crowd control or crowd dispersal. The frequencies selected create a resonance with an individual’s bodily system that is amplified to achieve the desired effect; which would be disorientation or causing someone to feel actual pain. Experimentation is underway with very low volume, low power, devices that can be used for the same purpose. Again these technologies and devices are all outputting digital frequencies. When the vibrations of a sound-producing body cause another body to vibrate in the same frequency, not normally its own, the vibration is known as forced vibration. 18 Therefore a digital signal can have an effect on an analog system. The question becomes, are the digital frequencies having a positive effect, or are they just a stressor that can mask the true issues? Or the conundrum in some cases, can that stressor have some type of a positive effect?

            A Manufacturer and Distributor of a “Digital” PEMF (or any other frequency device that is supposed to benefit the human body, i.e. a modern Rife machine) claiming that frequencies and frequency patterns have been developed through establishing resonance effects with cells within the body, may be technically correct. The true question is: Are those resonance frequencies actually positive for the body, or are they just overpowering the natural system to create a resonance without regard to the long-term effects?

            A simple example would be the reduction of pain. If your big toe hurts; one way to reduce that pain is to hit your finger with a hammer. The amazing result is that your big toe no longer hurts. Did the underlying issue get resolved? No, but the pain has been overpowered by the new pain in the finger. Is it possible the use of digital frequencies work much the same way?

            To explain the Analog aspect in more depth, it is important to first understand that the human body is made of atoms19 and each atom has a very specific set of frequencies depending on the state it is in (i.e. hydrogen line; 1420.40575 MHz is the precession frequency of neutral hydrogen atoms).20 The primary basis of an atom is that it is essentially energy. Each atom has electrons, protons, etc., and each atom has a specific frequency (those frequencies go out at least 5 decimal places, i.e. 23.18735 Hz).

            Frequencies are measured in Hertz, which is the total number of waves, peak to peak, in one second, and the amplitude is the height of the wave; think of the volume of your stereo, the frequencies stay the same, but the volume, or amplitude, increases, or goes up, when you turn up volume.
            For some reason, western medicine stops acknowledging any of these principles once two or more atoms are combined to form a molecule. Everything becomes chemical and the only energetic consequences are the positive and negative polarity and the charges that are required to bind the atoms together. However, according to the First law of Thermodynamics: Conservation of Energy, Energy can neither be created nor destroyed. Therefore, the frequencies don’t just go away, just because western medicine refuses to acknowledge it.

            Now if several different atoms are combined to create a molecule, there is a combination of specific frequencies, and if a number of molecules are combined to create a part of a cell, again a combination, or resonance of frequencies, is formed. Now combine all the various parts of a single cell; you definitely don’t end up with a single, specific frequency that only goes out 2 decimal places, i.e. 32.4 Hz. Instead you have a resonance frequency spectrum of “complicated” sinusoidal waves, that measure out to 5 decimal places. In other words the harmonic resonance of that single cell is not digital, but is analog.

            Are there any PEMF units that are effective? Yes. Some do seem to provide positive effects with certain issues, however the digital units do not provide anywhere near the effectiveness as can be expected from analog HS-PEMF device usage.

            Comment


            • #7
              I also was looking for the thread

              Comment


              • #8
                Yes I joined to find out more about PEMF.

                Living a Life of Expectations is always going to lead to Unhappiness.
                Yet I thought I'd discover more about why the magnetic field orientation of either Neg - North or Pos- South, might be explained. <I'm still in Limbo>
                A list of relevant PEMF frequencies and there related benefits might have prevailed with a bit of a explanation, perhaps related to Specific cellular Protein receptors
                on the cell membranes, <see Dr Bruce Lipton>
                I'm still wondering about the affect of different wave forms ranging from , Square waves too Sine wave form pulses. What affect does a saw tooth wave form have? for example
                compared too a Square wave pulse.
                Has there been any studies on Exposure times.? ie is 5 minutes and good as 30 minutes.
                Are there any advancements in the PEMF to include additional FM modulated frequencies or Bio-feedback signals?

                Something is always better than Nothing, unless your into Plasma and Quantum physics across the Z-pinch Filament.

                BabaGlee

                Comment


                • #9
                  My evidence is completely anecdotal, but...

                  I have had carpel tunnel surgery on both hands from years as a Drummer/Mechanic. the surgery relieved the continuous numbness but did nothing to restore the muscle that had died. I still get random numbness and my hand strength has never been what it was. even now there is a bit of tingling in my right hand. If I place my hands around a well tuned SG coil and just sit for about 10 minutes, complete relief is the result. the scalar emanating from the coil has a restorative function. I am not a doctor and I don't play one on T.V. nor do I recommend any modalities of therapy for anyone. but this works for me.

                  Tom C


                  experimental Kits, chargers and solar trackers

                  Comment


                  • #10
                    Originally posted by Tom C View Post
                    My evidence is completely anecdotal, but...

                    I have had carpel tunnel surgery on both hands from years as a Drummer/Mechanic. the surgery relieved the continuous numbness but did nothing to restore the muscle that had died. I still get random numbness and my hand strength has never been what it was. even now there is a bit of tingling in my right hand. If I place my hands around a well tuned SG coil and just sit for about 10 minutes, complete relief is the result. the scalar emanating from the coil has a restorative function. I am not a doctor and I don't play one on T.V. nor do I recommend any modalities of therapy for anyone. but this works for me.

                    Tom C
                    Startling Tom!! I wonder about how the Scalar can add or act against the Health.. have you figured out what optimum arrangement/ orientation of the Coil/ Magnet Interaction does what???
                    as i stated in another thread here..I get excellent memory restoration after a brief exposure to Ozone enviroment..just as you said it may me a combination of Scalar Interaction apart from its Chemical property or both...
                    Rgds,
                    Faraday88.
                    Last edited by Faraday88; 04-21-2016, 09:19 PM.
                    'Wisdom comes from living out of the knowledge.'

                    Comment


                    • #11
                      Apparently a Magnetic pulse is going to greatly improve body fluid circulation in the treated area.
                      This equates to reducing inflammation.
                      A de-polarising affect on body fluids is observed via microscopic review.

                      This EMF application will therefore assist the absorption of substances on your skin.
                      According to Dr Robert Becker, "Body Electric, research the presence of colloidal silver
                      in the body triggers the production of Stem cells. He regrew limbs in his research in India.

                      Apply the herb Comfrey and Colloidal Silver to the dead muscle area and its Cell repair and
                      accelerated growth ability might regrow that dead muscle. Your PEMF is just the thing to restore your
                      hands to full functionality.

                      Can you adjust the pulse rate?

                      BabaGlee
                      North Pole towards the skin is the excepted orientation.
                      Why? I don't know.

                      Comment


                      • #12
                        Hello All
                        I new to this forum. Hai everyone. My question to all the members, "Has anyone examined the interior of the high power PEMF machine? What is the size of the high voltage capacitor and operational voltage? My guess is possibly 1uF at 12-15 kV
                        Thanks

                        Comment


                        • #13
                          It is very impressive that 10 minutes of PEMF therapy reversed MS of many years in a lady under very unusual circumstances.
                          Here is the supporting video.

                          https://youtu.be/AUkghOXZV6I
                          PEMF Miracle in Room 237

                          What do think?

                          Comment


                          • #14
                            Building PEMF device

                            I am introducing myself as a new member. Hope to start building my usable PEMF device.

                            Comment


                            • #15
                              BabaGlee please watch this video:
                              https://youtu.be/AUkghOXZV6I
                              The Dr himself was pretty sick, but, PEMF changed things and then, another miracle happened.

                              I was impressed and convinced
                              Lightworker2
                              Last edited by Lightworker2; 02-08-2019, 07:47 PM.

                              Comment

                              Working...
                              X