Bedini RPX Sideband Generator

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


2019 ESTC ALL SEATS SOLD OUT!
PRE-REGISTER FOR THE
2020 ENERGY CONFERENCE

Monero XMR

Search:

Type: Posts; User: rdvideo

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Thanks RS_ for sharing the schematic which is...

    Thanks RS_ for sharing the schematic which is rather complex by looking at it and you like to squeeze as much as you can onto one page and not easy to read. :)

    Now your explanation of back...
  2. Hi RS_, Just wanted to mentioned that I found...

    Hi RS_,

    Just wanted to mentioned that I found what you are talking about "Back Popping" the primary battery. JB talked about this in his 2013 presentation, adding a diode for "Generator Mode" that...
  3. Hi RS_, While trying to find how to get a copy...

    Hi RS_,

    While trying to find how to get a copy of PL's 2015 presentation on back popping the charge battery, I found a bunch of pictures of your presentation showing everything from different...
  4. Hi RS_, Why did you change two of the coils...

    Hi RS_,

    Why did you change two of the coils from the original coils? What was the magnet wire used on the new Teslagenx coils? They both look like they are loaded with wire as compared with the...
  5. Thanks for the pic RS which I found last night,...

    Thanks for the pic RS which I found last night, saved it and have supplies to implement it now. There was another view of this setup from the front where it looks like the setup is being powered from...
  6. Thanks for info RS. I don't think JB made a...

    Thanks for info RS.

    I don't think JB made a video about multi-coil SSG's but need to look again just in case as part of the Energy From The Vacuum Science Series. I don't play with YouTube too...
  7. Thanks for the explanation JK. I had all of this...

    Thanks for the explanation JK. I had all of this info back in 2013 when I was using my bike wheel version with a bi-filar I made using 7AH batteries and recorded everything the best I could and...
  8. Enjoyed reading about charge/discharge and will...

    Enjoyed reading about charge/discharge and will keep in mind. Added second coil and started second run after discharging the charge battery to around 12.3v. After adjusting the coil-to-rotor distance...
  9. I'm back, One thing I want to make note of is...

    I'm back,

    One thing I want to make note of is why my system stopped before all by itself is because of the cheap analog ammeter that I was using.6982.

    Good thing that I bought 2 of them and to...
  10. Thanks for the info RS! I still have some time...

    Thanks for the info RS! I still have some time before having to replace the primary since I am only using 1 amp of power! Primary battery is at 12.23v and charge battery at 12.82v. I think I need...
  11. I stumbled onto something because of the sound...

    I stumbled onto something because of the sound that the rotor was making, I had to loosen the collars I have on the shaft that helped keep rotor centered above coil. By making a little extra play, I...
  12. System works just fine, why it stopped I do not...

    System works just fine, why it stopped I do not know. Happy everything is still OK. I removed the extra diode at the output, don't know if it needed. Time to get ready for second coil after charge...
  13. Thanks RS, I disconnected the negative...

    Thanks RS,

    I disconnected the negative connection on the charge battery. But now I have another problem that I am looking into now. I started last night to run the system and charge the charge...
  14. Here's the pic after I adjusted the 1k pot to 1.5...

    Here's the pic after I adjusted the 1k pot to 1.5 amp at max speed.
    6976
    Now to get a better o'scope because I would like to see what is going on.

    Richard D.
  15. Well one did work, I do not know why the other...

    Well one did work, I do not know why the other pics did not work, must be doing something wrong trying to install multiple pics. But this pic shows what I get on my little digital o'scope after I...
  16. Hi, I don't know why the pictures are not...

    Hi,

    I don't know why the pictures are not working now. They worked before unless I'm doing something wrong. I select the Insert Image, browse to find picture and then upload. Otherwise I do not...
  17. Hello and thanks for the posts, I have to...

    Hello and thanks for the posts,

    I have to agree about analog o'scopes as compared to digital o'scopes are still far better in certain conditions!!! I am now sorry that I sold my HP analog 200 mhz...
  18. OK, let's try again, my anger got to me with to...

    OK, let's try again, my anger got to me with to many problems at home at same time, sorry about that.

    I changed the base diode from the 1N4007 to a 1N4001 with two in series. I also changed the...
  19. Hi RS, Just thinking about you mentioning...

    Hi RS,

    Just thinking about you mentioning about using a 1N4001 diode at the base of the transistor instead of the 1N4007 diode as supplied with the 8 transistor kit that JB put together. The...
  20. Thanks for the reply RS, I'll have to get some...

    Thanks for the reply RS,

    I'll have to get some on order, missed that in your PDF. Have to try this and see what happens.

    I have slowed down right now on my project because of a water leak...
  21. Hi all, I added the extra 1N4007 diode to the...

    Hi all,

    I added the extra 1N4007 diode to the base diode for a two diode drop at the base according to RS setup. The only difference it made was to increase the current draw from 2.7 amps to 3.6...
  22. Hello all, I'm back with some questions and...

    Hello all,

    I'm back with some questions and pictures about my setup with some things happening that is different than I read. I am using two new deep cycle batteries with a PL rotor and setup from...
  23. Thanks for the info. Waiting for inverter to...

    Thanks for the info.

    Waiting for inverter to arrive to discharge second battery I have. I could use the small 12v fans that I used for discharging when I built my first SSG using 7AH sealed...
  24. Hi, I now have more things to think about...

    Hi,

    I now have more things to think about thanks Faraday88 and RS again. Never played that much with coils in my electronic work except for coils needed in radios for tuning circuits or video...
  25. Thank you Faraday88 and RS again for the info. ...

    Thank you Faraday88 and RS again for the info.

    I'm still trying to understand the series connections of wires as PL explained in the third SG book and why not just use one piece of wire for the...
Results 1 to 25 of 60
Page 1 of 3 1 2 3