I would like to know if NGK or DENSO iridium spark plugs will work in plasma ignition purposes. Would you know the type of iridium spark plugs that have no resistor?
* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX
Type: Posts; User: akosiwilly
I would like to know if NGK or DENSO iridium spark plugs will work in plasma ignition purposes. Would you know the type of iridium spark plugs that have no resistor?
i have been using plasma ignition in my small car since November of 2013. I tried high capacitance caps (such as 22uf and 30 uf all 450v). but they cause rapid deterioration of the center electrode....
your diagram is correct. Even with with my homemade inverter i dont have problem running this circuit. and the capacitor discharges is pretty impressive even with using high uf capacitor at least for...
1. There is no need to take the negative cable off the engine. what i mean here is to directly connect the negative of the inverter directly to the negative of the battery so that the capacitor's...
1. the resistor is 100 ohms 50 to 100 watts. 100watts is better. you can buy it from ebay.
2. the electrolytic cap should be placed across after the resistor and the negative of the bridge rectifier...
from the AC output of the inverter from chemelec.com connect the bridge rectifier.2575
This is the inverter circuit is used from chemelec.com. its easy and cheap to build. in my set up the maximum output is about 180 AC volts only since this is not efficient but it works great. I...
I used a very rugged inverter with an output of 5 amperes maximum to charge my cap 2.2uf 450 volts. i have actually series of caps intalled with i connect with multi switch potentiometer to study the...
Please watch this video of my plasma ignition installed in my 660cc minivan with carburetor. I installed this on March 2013 til now i don't have problem with it. Plasma igntion installed in van -...
hi subadude. i don't any idea about the type of CDI my car has. but it has a distributor. inside that distributor is the CDI. this CDI discharges about 350 to 400 volts in the ignition coil. Sorry i...
subadude. i.m using a stock CDI for my 3 cyclinder car equipped with negative ground alternator. i actually did what you did by connecting one end of 3 arrays of diodes (25 pcs in each array- each...
that's nice. do you have an external source (inverter) in your plasma ignition circuit? where do you connect your HV diodes from? I have a running plasma ignition in my carbureted CDI car but i use...
