Announcement

Collapse
No announcement yet.

Bedini 1984, 2017 style.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bedini 1984, 2017 style.

    Pimped.
    IMG_20170706_115519958.jpgIMG_20170707_160158463_BURST000_COVER_TOP.jpg

    6 Filar coil in parallel - 16VDC
    6 Filar coil in series - 700VDC+

    .375mm wire at 30ohms a piece.
    25mm core.
    Last edited by Deuis; 07-07-2017, 05:40 AM.
    Cant spend it when your dead.

  • #2
    Slick!

    Comment


    • #3
      G'day John,

      Lets change things up and do a leap of faith.
      Lindemann always says the bigger the wheel the better the efficacy.
      The problem with that is all the hobby guys cant build big balanced wheels with evenly spaced magnets.

      http://www.ebay.com.au/itm/48V-Elect...oAAOSw1BlZQebh

      Well here is a big fairly balanced wheel (580mm diameter) with markings on the rim which allow a 5, 10 or 15mm cutouts for magnets which can be done with just a file.
      The shaft is strong for mounting, bearings are good and as a bonus a 1000W brushless motor is attached.

      With the motor you can used it to drive the flywheel (the motor wheel and magnets weigh about 4kg) at any speed you wish for testing various coils.
      You can do as im doing, test various coils as gennie coils for their effectiveness.
      Maybe you could even just use the big wheel and throw 40 gennie coils around it.
      The motor itself uses 45W of power to drive the wheel at 500rpms. (without stripping the grease from the bearings)

      I'll let you all figure out the potential for yourselves.
      Cheap wheel, throw a few magnets on and hey presto a really good rig for experimentation.

      For those who are able to access my private profile photos you will see a mini blog created with photos and experiments done to date already.

      Today I hooked an 8 Filar 18Ga coil in series and charged a 10F Capacitor.


      Originally posted by John_Koorn View Post
      Slick!
      Last edited by Deuis; 07-07-2017, 10:07 PM.
      Cant spend it when your dead.

      Comment


      • #4
        Hey Deuis,

        Nice work! Been following your efforts for awhile.

        Good to have someone see the forest through the trees.

        Yaro
        Yaro

        "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

        Comment


        • #5
          Thanks Yaro,

          I'm a simple man so I like to break things into singular steps.
          If anyone has any tips or advice on generator coils it would be much appreciated.
          I only have so much time for testing before weeks turn into years and projects that never were.

          I've built a core out of transformer steel which matches the width of the magnets.
          I will be wrapping that in 18ga and comparing to the 3/4'' standard 8 Filar for some base readings.
          Currently building various bits and pieces for loads to compare.

          Did you see my profile folder pics?

          Originally posted by Yaro1776 View Post
          Hey Deuis,

          Nice work! Been following your efforts for awhile.

          Good to have someone see the forest through the trees.

          Yaro
          Cant spend it when your dead.

          Comment


          • #6
            I removed 24 magnets and spaced 12 around the wheel.
            some interesting results.

            Coil was completly random (4ohm 5filar) and tuned very roughly.

            Calcs with the coil generating were subtracted from free wheel to give actual power used to generate.

            Gen1.JPG
            Last edited by Deuis; 10-04-2017, 09:15 PM.
            Cant spend it when your dead.

            Comment


            • #7
              zzzzzzzzzzzzzzzzzzzzz
              Last edited by Deuis; 10-14-2017, 03:49 AM.
              Cant spend it when your dead.

              Comment


              • #8
                Originally posted by Deuis View Post
                I removed 24 magnets and spaced 12 around the wheel.
                some interesting results.

                Coil was completly random (4ohm 5filar) and tuned very roughly.

                Calcs with the coil generating were subtracted from free wheel to give actual power used to generate.
                Just waking you up! Interesting results to charge that capacitor in 84 sec. Be worth the effort to post a short video of this and the arrangement of the set-up to flesh out the details.

                Don't be overly disappointed with the seeming lack of interest - time of the year when a lot is happening. Many are still looking over your shoulder - just do it.

                Yaro
                Yaro

                "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

                Comment


                • #9
                  Test Data on an 8 Filar 18ga Bedini Spec coil in series.
                  6 magnets evenly spaced 323mm apart.
                  All North 6.JPGAll North 6 magnets.JPG
                  Last edited by Deuis; 02-16-2018, 02:24 PM.
                  Cant spend it when your dead.

                  Comment


                  • #10
                    Test Data on an 8 Filar 18ga Bedini Spec coil in series.
                    12 magnets evenly spaced 161.6mm apart.
                    Last edited by Deuis; 02-16-2018, 02:26 PM.
                    Cant spend it when your dead.

                    Comment


                    • #11
                      Test Data on an 8 Filar 18ga Bedini Spec coil in series.
                      12 magnets alternating N/S evenly spaced 161 mm apart.
                      North South 12.JPGNorth South 12 Magnets.JPG
                      Last edited by Deuis; 02-16-2018, 02:27 PM. Reason: repaired attachment
                      Cant spend it when your dead.

                      Comment


                      • #12
                        Test Data on an 8 Filar 18ga Bedini Spec coil in series.
                        9 Magnets in clusters of 3 spaced 53mm apart to simulate a 36 magnet wheel.
                        All North clusters of 3 @120.JPGAll North clusters of 3 @120 degrees.JPG
                        Last edited by Deuis; 02-16-2018, 02:28 PM.
                        Cant spend it when your dead.

                        Comment


                        • #13
                          Test Data on an 8 Filar 18ga Bedini Spec coil in series.
                          12 Magnets in clusters of 4 spaced 53mm apart to simulate a 36 magnet wheel.
                          All North clusters of 4.JPGAll North clusters of 4 A.JPGAll North clusters of 4 B.JPG
                          Last edited by Deuis; 02-16-2018, 02:29 PM.
                          Cant spend it when your dead.

                          Comment


                          • #14
                            12 Magnet wheel all north with adjustable coil. 2" X 1" x 1/2" magnets
                            12 North Out.jpgCoil Holder.jpgClusters of 4.jpgIMG_20180116_135034006.jpg
                            Last edited by Deuis; 02-16-2018, 02:36 PM.
                            Cant spend it when your dead.

                            Comment


                            • #15
                              Yo John,

                              Happy Valentines Day and thanks for your complete test results and pics on the magnet cluster progression. Nice meaty spikes generated that multiply the output for a minimum additional input. As a suggestion an accompanying chart with the freewheel data without magnets would be useful to establish the input baseline.

                              For us neophytes it would be useful to briefly explain your goal in these experiments and to broaden the perspective. Nice work on the coil holder - assume that the 3D printer was in play here.

                              BTW - the attachment in post #11 is MIA.

                              Thanks for sharing your neat and informative work - glad to see you are still active after a short hiatus.
                              Yaro

                              "The Universe is under no obligation to make sense to you." -Neil Degrasse Tyson

                              Comment

                              Working...
                              X