Aaron Murakami

Hi Aaron !
This is just great news, keep the work further!

Hi Aaron,
Good to see this ! what are we going to have here different from the main page forum..?
Rgds,
Faraday88.

This is for members to have a personal blog - a bit different from the forum. I have it disabled for everyone because many spammers use it. However, if any of you do want it enabled for your account and you want to blog, let me know and I can opt you into it.

Hi Aaron
I am new, this is my first blog ever. I am trying to build a bedini SG that will keep a battery charged that is running an alternator that is charging a bank of 4 batteries which run inverters to power my 50amp travel trailer. I am retired on a fixed income and need to lower or ultimately eliminate my electric bill. It is so confusing when the schematics say to use like " 470 ohm resister " and you look to buy and there are 1 watt 5%, 1/2 watt 5%, 1/4 watt 5% etc. How is anyone suppose to know which one to buy? It would help if all the parts lists would include this information. It says to get a 2N3055 transistor, a 1N4001 & 1N4007 diodes and ? 100 or 470 ohm resistor and Neon bulb, but do not include the specific details of each. Can you or anyone help me clear this up so I know what to purchase to build my unit? Is there anywhere you can get your coils made with bifiler or more and have cores complete ready to put to work? I have limited space and can not make my own multi wire coils. Sorry for the long post but have a lot of issues and like I said this is my first time posting to any blog so let me know if I am doing anything wrong please. Thanks ahead of time for any help anyone can give me.

Originally Posted by dnevermore

Hi Aaron
I am new, this is my first blog ever. I am trying to build a bedini SG that will keep a battery charged that is running an alternator that is charging a bank of 4 batteries which run inverters to power my 50amp travel trailer. I am retired on a fixed income and need to lower or ultimately eliminate my electric bill. It is so confusing when the schematics say to use like " 470 ohm resister " and you look to buy and there are 1 watt 5%, 1/2 watt 5%, 1/4 watt 5% etc. How is anyone suppose to know which one to buy? It would help if all the parts lists would include this information. It says to get a 2N3055 transistor, a 1N4001 & 1N4007 diodes and ? 100 or 470 ohm resistor and Neon bulb, but do not include the specific details of each. Can you or anyone help me clear this up so I know what to purchase to build my unit? Is there anywhere you can get your coils made with bifiler or more and have cores complete ready to put to work? I have limited space and can not make my own multi wire coils. Sorry for the long post but have a lot of issues and like I said this is my first time posting to any blog so let me know if I am doing anything wrong please. Thanks ahead of time for any help anyone can give me.

Hi, if you post your SG related posts here: http://www.energyscienceforum.com/forumdisplay.php?f=21
that is the SG forum where you can get help.

A Simple Aether Sensor
I am having difficulties posting my blog here
I will try to post a link to it in the forum instead.

Im Individual Inventor, and this is my Work: Featured Project Development - State of the Art Novel InFlowTech; 1-Gearturbine RotaryTurbo, 2-Imploturbocompressor One Compression Step:

*Wordpress Blog State of the Art Novel InFlow Gearturbine Imploturbocompressor:
http://stateoftheartnovelinflowtech.blogspot.mx/







*1-GEARTURBINE BEHANCE Images Gallery Portafolio:
https://www.behance.net/gallery/2101...urbine-Project
-YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses



·1; Rotary-Turbo-InFlow Tech / - GEARTURBINE PROJECT Have the similar basic system of the Aeolipilie Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. 4 Turbos, Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type.

*2-IMPLOTURBOCOMPRESSOR BEHANCE Images Gallery Portafolio:
https://www.behance.net/gallery/2169...urbocompressor
·2; Imploturbocompressor; Implo-Ducted, One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion / New Concept. To see a Imploturbocompressor animation, is possible on a simple way, just to check an Hurricane Satellite view, and is the same implo inflow way nature.

How a new monopole photon paradigm could solve our energy problems.
Interference Black Holes, Photonic Molecules, Ball Lightning, Micro Comets, Sprite-Fireballs and Sunspots According to Quantum FFF Theory.
see: http://vixra.org/pdf/1704.0272v2.pdf

I assume that the FORM and MICROSTRUCTURE of real rigid stringy elementary particles, is supposed to be the origin of
FUNCTIONAL differences between Axion- Higgs- Graviton- Photon- and Fermion particles.
As a consequence, a NEW splitting, accelerating and pairing MASSLESS BLACK HOLE,
able to convert vacuum energy (ZPE) into real energy by entropy decrease, seems to be able
to explain quick Galaxy- and Star formation, down to Sunspots, (Micro) Comets, Lightning
bolts, Sprites and Elves, Sprite Fireballs and Ball Lightning.